Reolink RLC-410 Data Streams

Post here to indicate any hardware you have used and which is known to work with ZoneMinder. Not for questions.
FlippingBinary
Posts: 3
Joined: Tue Nov 27, 2018 5:54 pm

Re: Reolink RLC-410 Data Streams

Post by FlippingBinary » Fri Nov 30, 2018 2:44 pm

janw wrote:
Tue Oct 30, 2018 2:07 pm
Hi! I'm on v1.32.2. RLC-410 via FFMPEG smears crazy. Cannot get Remote / RTSP to work. Here's the config, can someone validate? Any news on the smearing over ffmpeg?
Did you get those settings via ONVIF auto configuration or did you manually enter them?

Also, is it a 4MP camera or a 5MP camera?

DerGraf
Posts: 23
Joined: Fri Aug 17, 2018 7:33 pm

Re: Reolink RLC-410 Data Streams

Post by DerGraf » Thu Dec 06, 2018 9:14 pm

Reolink RLC-410-5MP works only on 1.30.4 by now.

I have some VM with various 1.32 for testing but no luck with Reolink.

I think the capture height from @janw is taken from VLC MediaInfo Buffer Size. On my 5MP it say Video-Resolution is 2560x1440 and Buffer Size is 2560x1442. When i set a height of 1442 in Zoneminder i got 20% more CPU Load. So it´s a VLC thing and a height of 1440 is correct.

Hope the developers find a solution for Reolink users.

TheSwert
Posts: 7
Joined: Fri Jan 20, 2017 1:22 am

Re: Reolink RLC-410 Data Streams

Post by TheSwert » Fri Dec 14, 2018 4:46 pm

One thing I had to do to make all of my Reolink camera stop smearing is to use the RTMP urls. They're not well documented, but it solved my smearing issues.

https://reolink.com/wp-content/uploads/ ... -v1.61.pdf

Example for sub stream and main stream below. You set those to be your source path and then set the method to TCP.

Sub stream:

Code: Select all

rtmp://192.168.1.100/bcs/channel0_sub.bcs?channel=0&stream=0&user=admin&password=password
Main Stream:

Code: Select all

rtmp://192.168.1.100/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password

DerGraf
Posts: 23
Joined: Fri Aug 17, 2018 7:33 pm

Re: Reolink RLC-410 Data Streams

Post by DerGraf » Sun Dec 16, 2018 5:04 pm

Using rtmp stream really works. No smearing at the moment on 1.32.3

Thanks for the great workaround.

abarrafo
Posts: 3
Joined: Sun Feb 12, 2017 7:31 pm

Re: Reolink RLC-410 Data Streams

Post by abarrafo » Sat Dec 29, 2018 5:25 pm

I was unable to connect via RTSP, or FFMPG as suggested resulted in constantly bleeding/f*ed up video feed.

I ended up taking a cue from the BlueIris forums, and instead am trying ffmpg with rtmp path.. So far, seems like a better video feed, but sometimes the ffmpg with rtsp looked ok also. Crossing my fingers.

Example ffmpg path:
rtmp://10.0.0.11:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=USERNAME&password=PASSWORD

FlippingBinary
Posts: 3
Joined: Tue Nov 27, 2018 5:54 pm

Re: Reolink RLC-410 Data Streams

Post by FlippingBinary » Sat Dec 29, 2018 5:50 pm

TheSwert wrote:
Fri Dec 14, 2018 4:46 pm
One thing I had to do to make all of my Reolink camera stop smearing is to use the RTMP urls. They're not well documented, but it solved my smearing issues.

https://reolink.com/wp-content/uploads/ ... -v1.61.pdf

Example for sub stream and main stream below. You set those to be your source path and then set the method to TCP.

Sub stream:

Code: Select all

rtmp://192.168.1.100/bcs/channel0_sub.bcs?channel=0&stream=0&user=admin&password=password
Main Stream:

Code: Select all

rtmp://192.168.1.100/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
This worked for me with my Reolink RLC-420. The video stream has been stable for nearly a week now. Massive improvement! Thank you, TheSwert!

sogood007
Posts: 25
Joined: Tue Oct 26, 2004 6:53 pm

Re: Reolink RLC-410 Data Streams

Post by sogood007 » Sun Jan 13, 2019 7:05 am

using RTMP works for me too. I almost want to swap out the RLC-410. Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest