Search found 39 matches

by lbm
Thu Jan 16, 2020 8:38 pm
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] Cameras no longer showing FPS
Replies: 6
Views: 1389

Re: Cameras no longer showing FPS

Upgraded to 133.16, and its fixed as expected.

TY!
by lbm
Thu Jan 16, 2020 8:32 pm
Forum: ZoneMinder 1.33.x
Topic: [solved] Fail to start after ugprade from 1.32
Replies: 4
Views: 71

Re: Fail to start after ugprade from 1.32

I've fixed it.. I've got these errors, at some point, and increased it to 1024: ImageBufferCount 550 is too small. Needs to be at least 553. Either increase it or decrease time between keyframes Tried to lower it, to 550, and now it works, but with the above error. Increased it to 560, now error see...
by lbm
Thu Jan 16, 2020 7:53 pm
Forum: ZoneMinder 1.33.x
Topic: [solved] Fail to start after ugprade from 1.32
Replies: 4
Views: 71

Re: Fail to start after ugprade from 1.32

Sorry. Its Debian 10 buster, with zm: 1.33.16~20191225.23-buster In the zm web interface, I've got the following errors: Date/Time Component Server PID Level Message File Line 2020-01-16 20:53:11 zma_m18 1834 ERR Shared data not initialised by capture daemon for monitor Backyard_Modetect zm_monitor....
by lbm
Thu Jan 16, 2020 3:45 pm
Forum: ZoneMinder 1.33.x
Topic: [solved] Fail to start after ugprade from 1.32
Replies: 4
Views: 71

Re: Fail to start after ugprade from 1.32

Ok. So the "/lib/systemd/system/zoneminder.service" had #User=www-data Changed it to: User=www-data Can now, start but now it keeps crashing.. Jan 16 16:45:08 zoneminder zmdc[11048]: INF [Starting pending process, zmc -m 5] Jan 16 16:45:08 zoneminder zmdc[11145]: INF ['zmc -m 5' started at 20/01/16 ...
by lbm
Thu Jan 16, 2020 3:35 pm
Forum: ZoneMinder 1.33.x
Topic: [solved] Fail to start after ugprade from 1.32
Replies: 4
Views: 71

[solved] Fail to start after ugprade from 1.32

Hi, I've upgraded from 1.32 to 1.33 from the master repo. Then ran . zmupdate.pl to update schema changes, etc.. No other changes was done. But im now unable to start zoneminder. If I just trie with the binary, I get.: zmpkg.pl start 01/16/2020 16:29:56.314070 zmpkg[9087].INF [main:310] [Sanity chec...
by lbm
Fri Oct 25, 2019 8:32 pm
Forum: ZoneMinder 1.32.x
Topic: Help with File source type
Replies: 3
Views: 380

Re: Help with File source type

File type only works on jpeg I think. What you might want to do is use ffmpeg input type and use a file:// url in the source. The source type "file" is apperently not working, but this works for me as well, but now I just got spammed by this in the logs. Date/Time Component Server PID Level Message...
by lbm
Fri Aug 23, 2019 12:51 pm
Forum: ZoneMinder 1.33.x
Topic: Can't load data from Hikvision.pm
Replies: 4
Views: 464

Re: Can't load data from Hikvision.pm

I do not understand your question at all, can you please rephrase it, or explain it, in another way ?
by lbm
Fri Aug 23, 2019 12:49 pm
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] Cameras no longer showing FPS
Replies: 6
Views: 1389

Re: Cameras no longer showing FPS

Upgrade to 1.33.14 and see what happens. That is currently not really option for me at this time, I was wondering, if there was some sort of hack that I could create directly to the code. :oops: :twisted: :roll: Seems, that the mootools-core.js sends without https, but only as http. Part of googles...
by lbm
Fri Aug 23, 2019 7:07 am
Forum: ZoneMinder 1.32.x
Topic: Can only reach Apache test page with fqdn
Replies: 4
Views: 487

Re: Can only reach Apache test page with fqdn

Sorry, I have a little hard understanding your setup, but..

Have you tried, to change an host file, on a local computer, so the fqdn, points to internal ip, to see if this works ?
It might help narrow down the issue, where the problem is.

like
10.0.0.10 mydomain.com
by lbm
Wed Aug 21, 2019 11:13 am
Forum: ZoneMinder 1.32.x
Topic: Hikvision Buffers
Replies: 3
Views: 395

Re: Hikvision Buffers

My hikvision, is set as follows, where as is saves the "stream", when it detects an event, with 150 images, before and after the event. Also make sure when, there is motion detection, that the CPU utilization is not 100% saturated on all cpus/cores, then it will skip frames. Image Buffer Size (frame...
by lbm
Wed Aug 21, 2019 11:09 am
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] Cameras no longer showing FPS
Replies: 6
Views: 1389

Re: Cameras no longer showing FPS

Any suggestions ?

It's worth noticing, im running an reverse proxy infront of it, where the SSL certificated, and then forwards as normal plain tcp traffic.

This was working fine, with the older 1.30 versions.
by lbm
Thu Aug 08, 2019 8:48 am
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] Cameras no longer showing FPS
Replies: 6
Views: 1389

Re: Cameras no longer showing FPS

Hi, theres is only 2 cameras, and I have the same issue, if I only look at the single camera. From your input, I can see a lot of these errors. zm_fps_01.png So since, the site is served using SSL, and it load contents from an non-ssl site, I get this error. Actually it seems like the same, og same ...
by lbm
Mon Aug 05, 2019 9:20 am
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] Cameras no longer showing FPS
Replies: 6
Views: 1389

[SOLVED] Cameras no longer showing FPS

Hi,

after upgrading to 1.32.3, my cameras are no longer showing FPS. How can this be?
Now it only shows: "State: - fps", the number itself is actually missing.

Thanks.
by lbm
Thu Aug 01, 2019 10:52 am
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] no picture after upgrading to buster
Replies: 1
Views: 1111

Re: no picture after upgrading to buster

Ok, I got it fixed by reinstalling.

apt-get remove zoneminder
rm /etc/zm/conf.d/zmcustom.conf
a2dismod php7.0
a2enmod php7.3
systemctl restart apache2
systemctl restart zoneminder

updated /etc/zm/zm.conf
updated /etc/php/7.3/apache2/php.ini
by lbm
Thu Aug 01, 2019 9:31 am
Forum: ZoneMinder 1.32.x
Topic: [SOLVED] no picture after upgrading to buster
Replies: 1
Views: 1111

[SOLVED] no picture after upgrading to buster

Hi, I have no picture on my cams, after upgrading to debian buster, and installing from the multimedia repo: https://wiki.zoneminder.com/Debian_10_Buster_with_Zoneminder_1.32.3_the_Easy_Way instead of the cam-feed, it just shows an small icon, as the image is missing?. In the logs I have this: Date/...