Hello to everyone. My name is Joe and I'm a little new to Zoneminder so please bare with me.
First off I have Zoneminder up and running just fine for two IP cameras I use. One being an Axis 211a and one is a Panasonic BL-C111 work fine although I cant PTZ the Panasonic I could use some help with that.
What I'm really needing help with is Axis 241QA server. I have done lots of searching on Google and every forum I can find and have found very little on the subject. I'm in hopes some of the guys on this forum will be willing to take the time to help me resolve this.
This what I'm using …
Axis 242QA Server 4 Covi EVQ-1000 cameras.
Firmware ver. 4.47
The server is set up with no user name or password for viewing.
I'm running two Zoneminder servers one local and one remote.
The local ZM Server is using Ubuntu 9.10 and ZM v1.24.1
The remote ZM Server is running CentOS 5.4 and ZM v1.24.2
I have tried every thing I can think of but cant get any video. Just the pop up windrow and a black screen.
So I turn to you all to see if we can solve my problem.
Thanks everyone for you time and help in advance.
Joe
joe@tomcatonline.com
325-665-0560
Zoneminder and Axis 241QA Help Please
The host path should be something like:
/axis-cgi/mjpg/video.cgi?resolution=CIF&camera=1
with correct camera number for the port you are using.
I imagine if you leave off the "&camera=?" bit you will get the index page image as thats the path for my single port axis server.
http://www.zoneminder.com/forums/viewto ... t=axis+241
/axis-cgi/mjpg/video.cgi?resolution=CIF&camera=1
with correct camera number for the port you are using.
I imagine if you leave off the "&camera=?" bit you will get the index page image as thats the path for my single port axis server.
http://www.zoneminder.com/forums/viewto ... t=axis+241