Elro C903IP

[taste]

I bought a low cost Elro C903IP goo.gl/J5XQp cam. So far I am surprised by the performance and it works very well with my android phone. However I can not find the configuration to get it work with zoneminder. Does anyone has any hints?

[taste]

Found the answer myself:

General Tab:
source type: Remote

Source Tab:
Remote protocol: HTTP
Remote Method: Simple
Remote Host name user:password@<cam_IP>
Remote port: 80 or the port you changed to
Remote host path /videostream.cgi


An than it works

[zen2tux]

Found the answer myself:

General Tab:
source type: Remote

Source Tab:
Remote protocol: HTTP
Remote Method: Simple
Remote Host name user:password@<cam_IP>
Remote port: 80 or the port you changed to
Remote host path /videostream.cgi


An than it works

Got the Elro C903IP working.
* As admin in Elro tool (server push mode)
User settings for Visitor e.g.: demouser, demopass
Network: set fixed LAN-IP (e.g. 192.168.0.200)
* ZoneMinder (vs. 1.24.x)
Host: the fixed LAN-IP
Path: /videostream.cgi?user=demouser&pwd=demopass&rate=11
(max. framerate: rate=0)
Resolution: 640x480
(restart ZoneMinder)
* To get it on the internet: port-forwarding for the LAN-IP
* WiFi: once working with LAN-cable, SSID and passwd can be set in the Elro tool. Device can be found at same LAN-IP.
* Other Zoneminder-settings: see quoted text
Be Happy