DS-2DE3304W-DE PTZ

Forum for questions and support relating to 1.33.x development only.
Post Reply
joeCarmon
Posts: 3
Joined: Sun Nov 24, 2019 2:07 am

DS-2DE3304W-DE PTZ

Post by joeCarmon » Sun Nov 24, 2019 2:13 am

Has anybody gotten the Hikvision DS-2DE3304W-DE to work for PTZ? I have been struggling with this for quite some time. The camera streams, but I am unable to control it.

joeCarmon
Posts: 3
Joined: Sun Nov 24, 2019 2:07 am

Re: DS-2DE3304W-DE PTZ

Post by joeCarmon » Sun Nov 24, 2019 3:43 am

Minor Update. I have set it for ONVIF, and think I am on the right track, but am getting http::80 (Bad hostname) in the error log for zmcontrol.

joeCarmon
Posts: 3
Joined: Sun Nov 24, 2019 2:07 am

Re: DS-2DE3304W-DE PTZ

Post by joeCarmon » Tue Dec 03, 2019 7:18 pm

Bumping to see if anybody has any ideas.

security_dude
Posts: 23
Joined: Sun Oct 07, 2018 6:55 pm

Re: DS-2DE3304W-DE PTZ

Post by security_dude » Wed Dec 11, 2019 1:21 pm

I have it working on my machine. Make sure you are using this syntax under the control tab for the control address.

userid:password@server IP:port number

For example admin:passwrod@192.168.1.200:80

Did you create a script for it yet? The control device under the same tab should be your script name. Hope this helps.

rockedge
Posts: 1139
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA
Contact:

Re: DS-2DE3304W-DE PTZ

Post by rockedge » Thu Dec 12, 2019 4:54 pm

does the Hikvision.pm work for these DS-2DE3304W-DE cameras?

Are the control commands correct in the control script?

security_dude
Posts: 23
Joined: Sun Oct 07, 2018 6:55 pm

Re: DS-2DE3304W-DE PTZ

Post by security_dude » Sun Dec 15, 2019 10:40 pm

PM sent with modified script for you to try out.

rockedge
Posts: 1139
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA
Contact:

Re: DS-2DE3304W-DE PTZ

Post by rockedge » Mon Dec 16, 2019 1:53 pm

Thanks! I am reviewing some of the different control scripts so this info helps!

kobold81
Posts: 9
Joined: Fri Jan 11, 2019 4:42 pm

Re: DS-2DE3304W-DE PTZ

Post by kobold81 » Sun Dec 29, 2019 11:28 pm

Hi,

I have the DS-2DE2A404IW-DE3 working with the HikVision script provided by zoneminder.

Control Device: DS-2DE2A404IW-DE3
Control Address: admin:Password@10.10.4.21

Control Type: HikVision
Then click "Edit" next to Control Type.
Move: I clicked everything on
I entered Values at Pan, Tilt, zoom and clicked zoom on on.

I am still trying to figure out if a change in e.g. Pan steps dies anything ;-)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest