Search found 10 matches

by moses
Tue May 15, 2007 8:10 pm
Forum: Non-ZoneMinder Chat
Topic: How to acess the audio stream of Gadspot Cams?
Replies: 2
Views: 5159

How to acess the audio stream of Gadspot Cams?

Hello,

we are triying to connect our Gadspot IP-Cams to an Asterix PBX Server.
Our intention is, to connect the audio-stream of the Camera to a telephone-channel.

But unfortunately we do not have any information how to receive the audio-stream
from the cam.

Best regards
Bernhard
by moses
Wed Jan 24, 2007 9:35 am
Forum: ZoneMinder Previous Versions
Topic: Problem: big_alarmzone=ok small_alarmzone=headache
Replies: 12
Views: 4156

Phil,

yes, this is a fresh 1.22.3 install (no upgrade ....)

The header of zm_zone.cpp shows: $Date: 2006/05/08 12:46:23 $, $Revision: 1.40 $

#ls -l zm_zone.cpp
-rw-rw-r-- 1 501 501 29688 8. Mai 2006 zm_zone.cpp

regards
Bernhard
by moses
Sat Jan 20, 2007 12:01 pm
Forum: Hardware Queries
Topic: getting the GS1200/NC1200 to work in zoneminder
Replies: 2
Views: 1942

also have a look at: http://www.zoneminder.com/forums/viewtopic.php?t=6715&highlight=nc1200 I spend several hours in getting this cam working within Zoneminder. I have the feeling, that the camera has some networking problems - which are not related to Zoneminder. Also: everytime you change the sett...
by moses
Sat Jan 20, 2007 11:40 am
Forum: Hardware Queries
Topic: ptz cam doesn´t return to home position
Replies: 4
Views: 2387

thank you for your answer: I made the following: -> camera configuration -> control I defined: "Return Location " = Preset_1 "Return Delay" = 5 -> Control Capability of my Camera I defined: Type=remote Can Move, Can Move Diagonally, Can Pan, Can Tilt, Has Presets, Num Presets = 16, Has Home Preset, ...
by moses
Fri Jan 19, 2007 8:37 pm
Forum: Hardware Queries
Topic: ptz cam doesn´t return to home position
Replies: 4
Views: 2387

ptz cam doesn´t return to home position

Hello, I configured my ptz cam and defined some presets(fixed positions) where the cam should go. So far everything is working fine. But according the docs it should be possible, that the cam returns to a fixed home-position. So in the monitor configuration (control panel) I defined the "Return-Loca...
by moses
Sun Jan 14, 2007 10:34 pm
Forum: ZoneMinder Previous Versions
Topic: Problem: big_alarmzone=ok small_alarmzone=headache
Replies: 12
Views: 4156

Phil, hope this helps: # addr2line -e /usr/local/bin/zma 0x40ee9a 0x419946 0x4213cf 0x404674 0x4043e9 /opt/ZoneMinder-1.22.3/src/zm_zone.cpp:156 /opt/ZoneMinder-1.22.3/src/zm_monitor.cpp:2685 /opt/ZoneMinder-1.22.3/src/zm_monitor.cpp:1021 /opt/ZoneMinder-1.22.3/src/zma.cpp:118 ??:0 --> cut Jan 15 00...
by moses
Sun Jan 14, 2007 4:56 pm
Forum: ZoneMinder Previous Versions
Topic: Problem: big_alarmzone=ok small_alarmzone=headache
Replies: 12
Views: 4156

cordel,

thanks for your answer. But the parameters for the zone weren´t bigger
then the zone itself.
My present workaround is: defining a very big zone and then overlaying
this Zone with inactive Zones. Some extrawork for my computer - but
a working solution ;-)

best regards
Bernhard
by moses
Fri Jan 12, 2007 6:28 am
Forum: ZoneMinder Previous Versions
Topic: Problem: big_alarmzone=ok small_alarmzone=headache
Replies: 12
Views: 4156

I had the same problems with a Fedora-6 32bit Installation on the
same machine. It´s an Intel dual-core.

regards
Bernhard
by moses
Thu Jan 11, 2007 6:40 pm
Forum: ZoneMinder Previous Versions
Topic: Problem: big_alarmzone=ok small_alarmzone=headache
Replies: 12
Views: 4156

Problem: big_alarmzone=ok small_alarmzone=headache

Hello, I did a fresh install of ZM on a Fedora 6 Box. Everything is working fine. I attached 6 Gadspot Network-Cams. But playing around with Alarm-Zones some problems arised. If the Alarmzone covers the whole Picture everything is ok. But if the Alarmzone is less then 50% of the picture size, the sy...
by moses
Tue Jan 02, 2007 8:00 pm
Forum: Hardware Queries
Topic: JJTech / Gadspot NC1200 W10 - Image capture error
Replies: 38
Views: 37734

benjaminellison, I had exayclty the same problem here. The Gadspot 1200 did not work. upgrading to 1.22.3 helped. There are still some problems with missing pictures. From time to time I get 10 or 20 empty/dark images. So the cam presently is not usable for motion detection - but at least I can watc...