Foscam FI9826W WIFI Wireless H.264 HD 1.3 Megapixel 3x Opti

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
pdharg
Posts: 23
Joined: Fri Feb 14, 2014 1:14 pm

Foscam FI9826W WIFI Wireless H.264 HD 1.3 Megapixel 3x Opti

Post by pdharg »

I have just bought the above, as my first ZM camera.

I am having no luck setting it up.

Anybody got it working yet, or suggestions please.

Thank you.

Peter.
pdharg
Posts: 23
Joined: Fri Feb 14, 2014 1:14 pm

Re: Foscam FI9826W WIFI Wireless H.264 HD 1.3 Megapixel 3x O

Post by pdharg »

Have now got it working with VLC Media PLayer using:

Code: Select all

rtsp://peter:peterpw@192.168.1.30:88/videoMain
But it refuses to record!

No joy with ZM, however.

Does the above suggest fundamental incompatibility with ZM, anybody please?
pdharg
Posts: 23
Joined: Fri Feb 14, 2014 1:14 pm

Re: Foscam FI9826W WIFI Wireless H.264 HD 1.3 Megapixel 3x O

Post by pdharg »

Code: Select all

2014-04-02 20:58:10.310970	zmdc	4376	ERR	'zmc -m 3' exited abnormally, exit status 255	zmdc.pl	
2014-04-02 20:58:10.242455	zmc_m3	5121	ERR	Unexpected response code 404, text is 'Not Found'	zm_rtsp.cpp	266
2014-04-02 20:58:10.238636	zmc_m3	5119	INF	Starting Capture	zmc.cpp	195
2014-04-02 20:58:10.124080	zmdc	5119	INF	'zmc -m 3' started at 14/04/02 20:58:10	zmdc.pl	
2014-04-02 20:58:10.124060	zmdc	4376	INF	'zmc -m 3' starting at 14/04/02 20:58:10, pid = 5119	zmdc.pl	
2014-04-02 20:58:10.037980	zmdc	4376	INF	Starting pending process, zmc -m 3	zmdc.pl	
Please help, someone. Thanks.
pdharg
Posts: 23
Joined: Fri Feb 14, 2014 1:14 pm

Re: Foscam FI9826W WIFI Wireless H.264 HD 1.3 Megapixel 3x O

Post by pdharg »

Have now got it working and recording with VLC Media Player, which suggests that it should work with ZoneMinder, but no joy yet.

Please could someone help, I have been struggling for a couple of months now, and still not got my first camera working. :roll: Thank you.
Post Reply