Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM !:(

Forum for questions and support relating to the 1.25.x releases only.
Post Reply
GoldiBoy
Posts: 3
Joined: Mon May 14, 2012 9:50 am

Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM !:(

Post by GoldiBoy » Sat May 19, 2012 12:29 pm

Hello !

For two months I am trying to setup two cameras Ovislink OD-2025HD and POE-250HD. I was reinstaling entire system maybe 10 times compiling couples od ffmpeg,s 0.6.5 0.8.12, 0.10x and I have such an image. image is blurred on halfway but on direct access to the camera is ok. Also VLC Player show good images on all too cameras profiles. I was tried all settings on camera (GOP, CBR, VBR) and I have on ZM such a view. Only o ZM all players show perfect images. I have ZM 1.25 on Centos 6.2 64bit, server HP XW6400, 4 GB RAM, 1x Intel Xeon L5320 quad core CPU. The same thing with Ovis OD-2025. I use direcly RTSP Source in ZM like rtsp://admin:airlive@192.168.1.106:554/media.amp?videocodec=h264&resolution=sxga. Please help me. Sorry for my english I am from Poland... :)

Regards,
Attachments
from ZM.jpg
image from ZM
from ZM.jpg (193.96 KiB) Viewed 2431 times
from camera.jpg
image from camera is perfect, all browsers, all profiles...
from camera.jpg (247.2 KiB) Viewed 2431 times

macropin
Posts: 5
Joined: Fri May 18, 2012 12:40 am

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by macropin » Sun May 20, 2012 2:27 pm

Sounds like a similar issue I hit with our Geovision cams... See ffmpeg<dot>org<slash>trac<slash>ffmpeg<slash>ticket<slash>285 (I had to break the url because I'm a new user and not allowed to post links)

You are right to be suspicious of ffmpeg. As far as I can tell RTSP support in FFMPEG is extremely buggy.

Have you tried prepending "?tcp" to the connection string? The "?tcp" suffix is an argument parsed and recognized by ffmpeg to not use udp. That resolved the issue for me with my cams.

GoldiBoy
Posts: 3
Joined: Mon May 14, 2012 9:50 am

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by GoldiBoy » Sun May 20, 2012 2:32 pm

Hello,

ThankYou for advice, where I must add this '?tcp' to string? At the end of string line ?

Thank You,

macropin
Posts: 5
Joined: Fri May 18, 2012 12:40 am

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by macropin » Mon May 21, 2012 12:46 am

Yes, at the end of the connection string. Similar to shown here http://www.zoneminder.com/wiki/index.ph ... =Geovision

GoldiBoy
Posts: 3
Joined: Mon May 14, 2012 9:50 am

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by GoldiBoy » Mon May 21, 2012 1:26 pm

It is working !

Thank You very much :)

Regards,

macropin
Posts: 5
Joined: Fri May 18, 2012 12:40 am

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by macropin » Tue May 22, 2012 7:58 am

Cool. Glad I could help :)

Now, if someone would just help me with my question.... http://www.zoneminder.com/forums/viewto ... 29&t=19252

neoncek
Posts: 2
Joined: Fri Nov 15, 2013 10:03 pm

Re: Ovislink POE-250HD and ZM 1.25 on Centos 6.2_64 PROBLEM

Post by neoncek » Fri Nov 15, 2013 10:14 pm

@GoldiBoy - may I ask you to share your configuration of OD-2025HD? I am running Ubuntu 13.04 on HP ProLiant Micro Server G7 N54L, ZoneMinder v1.25.0 installed via ubuntu repo. Basic connection with OD-2025HD in default is my issue.
ipcam setting - Video Profile1 - 1080p h264 EVBR 30fps

PS: I`am from Slovakia :)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests