Zoneminder, Firetide Wireless network, Install thread
Posted: Thu Sep 21, 2023 3:36 pm
We have an old setup that has died a horrible death years ago.. I have been charged with rebuilding the software side of the setup.. I will be loading Firetide Hotview Pro wireless network software for the campus buildings. (same equipment and software as the old setup)
https://www.firetide.com/
All the cameras are connected to/through 28 HotPort 7020 mesh node radios coming back to the central servers. The infrastructure is there and still working.
https://wirelessunits.com/firetide-hotp ... 00mw-node/
We have the following cameras:
10 > Axis Q6032-E ptz
https://www.axis.com/products/axis-q6032-e/support
60 > 2.0mp-hd-h264-dp1
https://www.sourcesecurity.com/avigilon ... tails.html
3 > 11mp-hd-pro-m With 35mm f2 lens
https://www.sourcesecurity.com/avigilon ... tails.html
10 > 5.0mp-hd-dn with Fuji 8-80mm f1.6 auto iris
https://www.sourcesecurity.com/avigilon ... tails.html
The servers we have are 4 x Dell Poweredge R710's with a total of 40tb of drives, 1 of the servers will be used for Firetide.
I am wanting to load Zoneminder on the servers to accomplish:
1. record and save all video
2. live view the video on a station/computer monitored 24/7
3. Be able to move the PTZ cameras
This system is a stand alone offline system so everything will be loaded from disks.
I know from reading most of the posts about larger installs that Zoneminder is really built for smaller installs. With that said, do you think I can get this to work? I have 4 cameras at my house connected to my Synology NAS and I configured everything for them. I load and update offline systems all the time so that is easy.
Thanks for looking over my post, I know it is a lot on the first post..
Casey
https://www.firetide.com/
All the cameras are connected to/through 28 HotPort 7020 mesh node radios coming back to the central servers. The infrastructure is there and still working.
https://wirelessunits.com/firetide-hotp ... 00mw-node/
We have the following cameras:
10 > Axis Q6032-E ptz
https://www.axis.com/products/axis-q6032-e/support
60 > 2.0mp-hd-h264-dp1
https://www.sourcesecurity.com/avigilon ... tails.html
3 > 11mp-hd-pro-m With 35mm f2 lens
https://www.sourcesecurity.com/avigilon ... tails.html
10 > 5.0mp-hd-dn with Fuji 8-80mm f1.6 auto iris
https://www.sourcesecurity.com/avigilon ... tails.html
The servers we have are 4 x Dell Poweredge R710's with a total of 40tb of drives, 1 of the servers will be used for Firetide.
I am wanting to load Zoneminder on the servers to accomplish:
1. record and save all video
2. live view the video on a station/computer monitored 24/7
3. Be able to move the PTZ cameras
This system is a stand alone offline system so everything will be loaded from disks.
I know from reading most of the posts about larger installs that Zoneminder is really built for smaller installs. With that said, do you think I can get this to work? I have 4 cameras at my house connected to my Synology NAS and I configured everything for them. I load and update offline systems all the time so that is easy.
Thanks for looking over my post, I know it is a lot on the first post..
Casey