Gaps in recording, errors in logs.

Discussions related to the 1.36.x series of ZoneMinder
Post Reply
generalkenobi2
Posts: 4
Joined: Thu Sep 07, 2023 4:03 pm

Gaps in recording, errors in logs.

Post by generalkenobi2 »

Gaps in recording, but camera not going down.

https://i.imgur.com/me1Utup.png

I've attached error logs.

I'm guessing something that's erroring out is causing the "drop" in recording. When i open the RTSP stream with VLC it never drops, it never drops in the vendor's app, it's only appearing to drop in zoneminder.

To those unfamiliar the dark areas in that bar graph are areas where no data is present, light areas have video data. I've confirmed it's writing to the drive.
Attachments
Error.txt
(3.73 KiB) Downloaded 20 times
Warning.txt
(35.82 KiB) Downloaded 15 times
generalkenobi2
Posts: 4
Joined: Thu Sep 07, 2023 4:03 pm

Re: Gaps in recording, errors in logs.

Post by generalkenobi2 »

Magic919
Posts: 1381
Joined: Wed Sep 18, 2013 6:56 am

Re: Gaps in recording, errors in logs.

Post by Magic919 »

Can’t save to storage it says.
-
generalkenobi2
Posts: 4
Joined: Thu Sep 07, 2023 4:03 pm

Re: Gaps in recording, errors in logs.

Post by generalkenobi2 »

I moved it from SMB to NFS and the symlink issue seems to have gone away.

this issues below persist.

Memory map file '/dev/shm/zm.mmap.2' does not exist in zmMemAttach. zmc might not be running.

DiskSpace: Event does not exist at /srv/dvr/zoneminder/events/1/23/09/07/12/56/03:ZoneMinder::Event: Cause => Continuous EndDateTime => 2023-09-07 12:57:07 Frames => 1486 Height => 1080 Id => 3632 Length => 63.69 MonitorId => 1 Name => Event-3632 Orientation => ROTATE_0 SaveJPEGs => 1 Scheme => Deep StartDateTime => 2023-09-07 12:56:03 StateId => 1 Width => 1920

Restarting capture daemon for Kitchen, time since last capture 47 seconds (1694110313-1694110266)

Restarting capture daemon for LivingRoom, time since last capture 46 seconds (1694110414-1694110368)
generalkenobi2
Posts: 4
Joined: Thu Sep 07, 2023 4:03 pm

Re: Gaps in recording, errors in logs.

Post by generalkenobi2 »

in the individual camera configs... what does source type do?
Post Reply