Zoneminder 1.36.26 No Picture show

Discussions related to the 1.36.x series of ZoneMinder
Post Reply
JKnill
Posts: 1
Joined: Tue Sep 20, 2022 7:38 am

Zoneminder 1.36.26 No Picture show

Post by JKnill »

Hello

we installed Zoneminder 1.36.26 on Ubuntu 20.04 LTS We have Configured a AXIS M3038 CAM and it shows in the Console connected ( green)

in the log i get

20.09.22, 10:06:36 MESZ zmc_m1 15812 INF Einfahrt: 8700 - Capturing at 12.46 fps, capturing bandwidth 9008556bytes/sec Analysing at 0.00 fps

And the monitor shows no Picture

if we do the URL configured in the Zoneminder http://IP.of.the cam/mjpg/video.mjpg?camera=2 we habe a Picture

Kind regards
Attachments
zoneminder Cam.jpg
zoneminder Cam.jpg (51.9 KiB) Viewed 575 times
bbunge
Posts: 2930
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: Zoneminder 1.36.26 No Picture show

Post by bbunge »

I have not been able to find much on this camera. It is likely it will work with RTSP and camera pass through but finding the stream parameters is the trick. You also need to match the video resolution exactly to the camera stream.
One trick I use is to get the cam to stream in VLC then use the stream UPL in Zoneminder. I had some very old Axix cams at one time and they worked very well in Zoneminder.

Also try this:

Try Source Type = Ffmpeg
Source Path = rtsp://<userID>:<passw>@<ip>:554/axis-media/media.amp
User avatar
iconnor
Posts: 2879
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Zoneminder 1.36.26 No Picture show

Post by iconnor »

If the logs say capturing then it is capturing.

The lack of picture means that your apache config is incorrect with respect to cgi-bin. Your logs are likely filled with a message directing you to this section of the docs:

http://zoneminder.readthedocs.io/en/lat ... window-etc

Ignore the cambozola stuff, it isn't relevant anymore. Go to option 2, configuring cgi-bin.
Post Reply