Define the duration of the recording for Modect Capturing

Discussions related to the 1.36.x series of ZoneMinder
Post Reply
ineichp
Posts: 2
Joined: Mon Aug 15, 2022 6:04 am

Define the duration of the recording for Modect Capturing

Post by ineichp »

Hello, everyone,
I integrated an IP cam into ZoneMinder via RTSP and defined a zone to detect movement. This also works perfectly. Unfortunately, however, most of the recordings are too short for my needs.
How or where can you set that if a movement is detected, the recording should basically e.g. continue walking for 20 seconds.

Attached are some screenshots of the settings.

Thank you for your support.
Attachments
Screenshot 2022-08-15 at 08.13.39.png
Screenshot 2022-08-15 at 08.13.39.png (68.92 KiB) Viewed 172 times
Screenshot 2022-08-15 at 08.13.23.png
Screenshot 2022-08-15 at 08.13.23.png (208.52 KiB) Viewed 172 times
Screenshot 2022-08-15 at 08.12.43.png
Screenshot 2022-08-15 at 08.12.43.png (574.47 KiB) Viewed 172 times
Last edited by ineichp on Mon Aug 15, 2022 10:34 am, edited 1 time in total.
Magic919
Posts: 1381
Joined: Wed Sep 18, 2013 6:56 am

Re: 50 / 5.000 Übersetzungsergebnisse Define the duration of the recording for Modect Capturing

Post by Magic919 »

It's all here - https://zoneminder.readthedocs.io/en/st ... nitor.html

It's under Buffers, Post Event Image Count
-
Post Reply