Page 2 of 2
Re: how to reduce cpu load?
Posted: Thu Jun 16, 2022 6:24 am
by Cramac1
how much it hung, did a hard reset. No such problems were observed.
and iotop does not see problems in hdd
Re: how to reduce cpu load?
Posted: Fri Jun 17, 2022 6:31 am
by Cramac1
At night, the CPU load drops, then grows again. while the traffic does not drop
- chart2.png (65.29 KiB) Viewed 3792 times
- chart2 (1).png (97.83 KiB) Viewed 3792 times
Re: how to reduce cpu load?
Posted: Fri Jun 17, 2022 8:19 am
by dougmccrary
What is server kur?
Do you have ecc memory? if not, have you tested it recently?
Do you have video acceleration available?
Is your database in an ssd?
Re: how to reduce cpu load?
Posted: Fri Jun 17, 2022 8:54 am
by Cramac1
I have several servers, the base is separate, on ssd.
server kur - problem server.
memory - before: 2*R748G2133U2S-U ; now: 1*KVR26N19D8/32
Code: Select all
Memory Device
Array Handle: 0x0028
Error Information Handle: 0x0034
Total Width: 64 bits
Data Width: 64 bits
Size: 32 GB
Form Factor: DIMM
Set: None
Locator: DIMM 1
Bank Locator: P0 CHANNEL B
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2667 MT/s
Manufacturer: Kingston
Serial Number: 20503ACD
Asset Tag: Not Specified
Part Number: 9905734-100.A00G
Rank: 2
Configured Memory Speed: 1333 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
> Do you have video acceleration available?
no
Re: how to reduce cpu load?
Posted: Sat Jun 18, 2022 6:31 am
by dougmccrary
So not ECC. Just to be sure, I'd run a test like memtest86 a couple passes.
Re: how to reduce cpu load?
Posted: Sat Jun 18, 2022 3:59 pm
by kobold81
I habve the same problem with 1.36. all 4 Cores are at 100%…with 1.37 ist comes down a bit. I use bullseye. Zm stopped the machine is at 25%, with zm started immedialtely at 100% no matter Cameras are disabled or in Monitor.
Re: how to reduce cpu load?
Posted: Sun Jun 19, 2022 12:21 am
by dougmccrary
Zm stopped the machine is at 25%
That seems high. What's it doing?
Re: how to reduce cpu load?
Posted: Sun Jun 19, 2022 4:59 am
by kobold81
Smbd, Openhab,vzlogger,grafana,postgre
When i run shinobi only one Core is at about 80%.
Re: how to reduce cpu load?
Posted: Sun Jun 19, 2022 6:07 pm
by Cramac1
updated to .19 immediately ate all the memory and the server hung. reverted back to .11
Re: how to reduce cpu load?
Posted: Mon Jun 20, 2022 12:55 am
by davidma
Cramac1 wrote: ↑Fri Jun 17, 2022 6:31 am
At night, the CPU load drops, then grows again. while the traffic does not drop
chart2.png
chart2 (1).png
Just a shot in the dark but how are your CPU core temperatures in the daytime? Is it throttling due to heat during the day but then cooling off at night?
Re: how to reduce cpu load?
Posted: Mon Jun 20, 2022 6:58 am
by Cramac1
It's not about temperature.
- chart.png (76.52 KiB) Viewed 3653 times
Here is the monthly schedule. After rebooting the server, the cpu became under 100, before that it worked by half.
Re: how to reduce cpu load?
Posted: Tue Jun 21, 2022 12:34 pm
by Cramac1
it's all about memory. He returned what was standing, the CPU load returned to normal 40-50%. I put a new one, cpu 100%.
- photo5301238147763518730.jpg (267.24 KiB) Viewed 3624 times
- photo5301238147763518731.jpg (378.4 KiB) Viewed 3624 times
Re: how to reduce cpu load?
Posted: Thu Jun 23, 2022 4:04 pm
by Cramac1
the problem was solved by replacing the memory with 2 * R7416G2133U2S-U
CPU usage is back to 40-50%
Re: how to reduce cpu load?
Posted: Thu Jun 23, 2022 5:01 pm
by dougmccrary
Yay!
