How to disable PTZ motion detection durning camera movement

Forum for questions and support relating to 1.33.x development only.
Post Reply
go0die
Posts: 3
Joined: Thu Jul 11, 2019 2:10 pm

How to disable PTZ motion detection durning camera movement

Post by go0die » Thu Jul 11, 2019 2:15 pm

Hello,

Started with ZM and now time came to use HikVision PTZ camera. I can move cam from ZM and make some presets, but the question is:
As I need to use motion detection, is it possible to disable PTZ motion detection durning camera movement?

rockedge
Posts: 1079
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA
Contact:

Re: How to disable PTZ motion detection durning camera movement

Post by rockedge » Thu Jul 11, 2019 4:15 pm

there could be a round about way to do it by using "run states" and set up 2 different monitors using the same camera....
monitor 1 has no PTZ control and does have motion detection active
monitor 2 has PTZ but motion detection turned off.

save a run state that has camera 1 set to "modect" and camera 2 "none"
then save a run state that has camera 1 set top "none" and camera 2 set to monitor so you can move it.
choose by selecting which run state ZM is operating under

only an idea..may work for you

go0die
Posts: 3
Joined: Thu Jul 11, 2019 2:10 pm

Re: How to disable PTZ motion detection durning camera movement

Post by go0die » Mon Jul 15, 2019 6:12 am

rockedge wrote:
Thu Jul 11, 2019 4:15 pm
there could be a round about way to do it by using "run states" and set up 2 different monitors using the same camera....
monitor 1 has no PTZ control and does have motion detection active
monitor 2 has PTZ but motion detection turned off.

save a run state that has camera 1 set to "modect" and camera 2 "none"
then save a run state that has camera 1 set top "none" and camera 2 set to monitor so you can move it.
choose by selecting which run state ZM is operating under

only an idea..may work for you
Thank you for reply!
I will test it some day and write here results.

go0die
Posts: 3
Joined: Thu Jul 11, 2019 2:10 pm

Re: How to disable PTZ motion detection durning camera movement

Post by go0die » Mon Jul 15, 2019 6:21 am

rockedge wrote:
Thu Jul 11, 2019 4:15 pm
there could be a round about way to do it by using "run states" and set up 2 different monitors using the same camera....
monitor 1 has no PTZ control and does have motion detection active
monitor 2 has PTZ but motion detection turned off.

save a run state that has camera 1 set to "modect" and camera 2 "none"
then save a run state that has camera 1 set top "none" and camera 2 set to monitor so you can move it.
choose by selecting which run state ZM is operating under

only an idea..may work for you
But problem is, that I need to use some assets when and where camera moves by itself, so I need better solution.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest