Source Type: Web Site

Forum for questions and support relating to the 1.32.x releases only.
Post Reply
goofy
Posts: 4
Joined: Sat Feb 02, 2019 3:31 pm

Source Type: Web Site

Post by goofy » Sat Feb 02, 2019 5:01 pm

Hello everybody.
I'm running two Zoneminder installations, location1 and location2, version 1.32.3.
I'm trying to add a camera from location2 at location1, using Source Type: Web Site, Function: Monitor.
Using the follwing: https://ip-addr:port/zm/cgi-bin/nph-zms?mode=jpeg&monitor=1&user=usr&pass=pwd
This does work from any browser.
When I save these settings, Source Type goes back to Local!
Seems impossible to do this!
Anyone tried this?
Best regards
Rune

bbunge
Posts: 2405
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: Source Type: Web Site

Post by bbunge » Sat Feb 02, 2019 9:41 pm

Do you have them set up as multi server?
You also need to tell us your Linux distro and version.

goofy
Posts: 4
Joined: Sat Feb 02, 2019 3:31 pm

Re: Source Type: Web Site

Post by goofy » Sat Feb 02, 2019 10:08 pm

Hi
No, they are running both as single servers.
I'm running Lubuntu 18.04 on both.

Pedulla
Posts: 133
Joined: Thu Nov 27, 2014 11:16 am
Location: Portland, Or

Re: Source Type: Web Site

Post by Pedulla » Wed Feb 06, 2019 4:38 am

I don't get this on my UB18.04 zm1.32.3 setup.
The monitor stays as website.

goofy
Posts: 4
Joined: Sat Feb 02, 2019 3:31 pm

Re: Source Type: Web Site

Post by goofy » Fri Feb 08, 2019 7:17 pm

Strange, I've tried this on both installations, same thing happen.
Did a fresh 1.32.3 install on one of them, since I upgraded from 1.32.2 to 1.32.3,
but same thing happen....

rockedge
Posts: 1097
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA
Contact:

Re: Source Type: Web Site

Post by rockedge » Sat Feb 09, 2019 2:51 am

in this case using a similar setup I found using the remote method captures another ZM system's monitor stream very well.
So not the "Web Site" method but the "Remote" method and then a path like

Code: Select all

/cgi-bin/nph-zms?scale=100&width=320px&height=240px&mode=jpeg&maxfps=30&monitor=3&auth=06f91479b0cf8d51baf69d4ab0a317d0
.

you might have to set Options->Systems->AUTH_RELAY to "none" on the ZM system you are grabbing the stream from

goofy
Posts: 4
Joined: Sat Feb 02, 2019 3:31 pm

Re: Source Type: Web Site

Post by goofy » Sun Feb 10, 2019 12:08 pm

Hi, thanks for your suggestion. I've tried this, but this method only support HTTP and RTSP.
I need to use HTTPS to access the server/camera.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests