Change port number web interface ZoneMinder

Forum for questions and support relating to the 1.31.x releases only.
Locked
Sjonnie
Posts: 2
Joined: Sat Jan 27, 2018 4:06 pm

Change port number web interface ZoneMinder

Post by Sjonnie »

Hi All,

Been busy installing ZoneMinder on my RPi3 as per these instructions: https://wiki.zoneminder.com/Raspbian. With a few modifications due to the fact that I use "stretch" I was able to install all necessary components.

But.... My RPi3 serves as a Domoticz server (port 2082 and 443) and has Pi-hole installed (port 80). I would really (really!) like to use another port for the web interface of ZoneMinder for instance 8080. I have searched this forum but cannot find a solution that works.

Anyone have a clue?

Looking forward!
Greetz,

Sjonnie
User avatar
iconnor
Posts: 2882
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Change port number web interface ZoneMinder

Post by iconnor »

ZoneMinder uses apache. Just configure apache to listen on another port.
Sjonnie
Posts: 2
Joined: Sat Jan 27, 2018 4:06 pm

Re: Change port number web interface ZoneMinder

Post by Sjonnie »

Thank you for your ultra swift reply.
Did some more searching based on your advice and stumbled upon this post: viewtopic.php?t=21721#p82527

Changed the port to 8080 in /etc/apache2/ports.conf and after a restart of apache2 the web interface as accessible from [internal ip]:8080/zm.

Thanks again!
Greetz,

Sjonnie
dougmccrary
Posts: 1177
Joined: Sat Aug 31, 2019 7:35 am
Location: San Diego

Re: Change port number web interface ZoneMinder

Post by dougmccrary »

I just ran into this after a reboot, having installed pihole on a zm server yesterday. It worked. Until I rebooted. Don't know how.

Anyway, Apache hadn't started due to pihole grabbing port 80.

I opted to change /etc/lighttpd/lighttpd.conf to port 81, Seems to work fine.
Locked