ZoneMinder Forums

I have 2 Uokoo IP cameras. One is classified as a X-series. Both are RTSP and ONVIR compatable. I cannot obtain feed from either camera. Logs state "unable to obtain feed". Both cameras operate with other various softwares. Any setup suggestions would be appreciated. I have tried the following with almost every conbination of Remote, FFMPEG, and Http as advised by a working software.

720p
rtsp://admin:(XXXX)@192.168.10.10:10554/tcp/av0_0 (FFMEPG)
rtsp://admin:(XXXX)@192.168.10.10/live/ch0 (FFMPEG)

http://admin:(XXXX)@192.168.10.10/mjpeg ... &channel=0 (MJPEG)
http://admin:(XXXX)@192.168.10.10:10554 ... =32&rate=0 (MJPEG)

720IP
rtsp://admin:(XXXX)@192.168.10.10/tcp/av0_0 (MJPEG)

x-series
rtsp://admin:(XXXX)@192.168.10.12/live/ch1 (FFMEPG)
rtsp://admin:(XXXX)@192.168.10.12/live/ch0 (FFMEPG)

X-Series IP Camera
rtsp://admin:(XXXX)@192.168.10.12/live/ch1 (FFMEPG)

I was able to get my Uokoo camera to work with the following link;

rtsp://admin:123456@10.0.11.26/live/ch0