Hi
i have 1.3MP Geovison cameras
GV-BL110D
GV-VD120D
that I would like to get working so i can turn off the windows server
I cannot get them to work
I found:
http://www.soleratec.com/support/rtsp/r ... =GV-BL110D
RTSP URL rtsp://ip_address:8554/CH001.sdp does not work
has anyone got GeoVison to work on ZoneMinder
Geovision no ONVIF models
Re: Geovision no ONVIF models
Check the options listed here (similar to the one you mentioned)
http://www.ispyconnect.com/man.aspx?n=Geovision
You could use VLC to access the camera stream and see if it works.
Check that the camera resolution in ZM matches the one set in the camera side, and that you could access the webserver of the ipcams. Also, sometimes you need to allow the port (8554 in your example) to be accessed in your router.
Hope it helps,
PacoLM
http://www.ispyconnect.com/man.aspx?n=Geovision
You could use VLC to access the camera stream and see if it works.
Check that the camera resolution in ZM matches the one set in the camera side, and that you could access the webserver of the ipcams. Also, sometimes you need to allow the port (8554 in your example) to be accessed in your router.
Hope it helps,
PacoLM
After more than 15 years, no longer using ZM as surveillance system.
Now in the dark side, using a commercial system...
Re: Geovision no ONVIF models
i tried the link
the camera uses Geovision type codec
the camera uses Geovision type codec