I have foscam C1 Camera bit its not working with zoneminder
i have configured all the settings on zone minder but still its not worked
i have purchased 6 foscam c1 camers
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
can anyone help me to sort out this issue
Code: Select all
Maximum FPS (?) : 2
Alarm Maximum FPS (?) : 5
Referentie foto Blend %ge : 6.25%
AlmRefImageBlendPct : 6.25%
Remote Protocol: RTSP
Remote Method: RTP Unicast
Remote Host Naam: user:password@8.8.8.8
Remote Host Pad: /videoMain
Target Color 24
Width: 1280
Height: 720
Code: Select all
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Packet in sequence, gap 8]
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Discarding frame 37150]
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Packet in sequence, gap 5]
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Discarding frame 37150]
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:43 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:43 zm zmc_m19[31587]: message repeated 2 times: [ WAR [Discarding packet for unrecognised ssrc d3ebfc02]]
Nov 21 22:25:44 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:45 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:45 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:46 zm zmc_m19[31587]: message repeated 2 times: [ WAR [Discarding packet for unrecognised ssrc d3ebfc02]]
Nov 21 22:25:47 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:48 zm zmc_m19[31587]: message repeated 8 times: [ WAR [Discarding packet for unrecognised ssrc d3ebfc02]]
Nov 21 22:25:48 zm zmc_m19[31587]: ERR [Error while decoding frame 33718]
Nov 21 22:25:48 zm zmc_m19[31587]: ERR [8: 00 00 01 06 e5 01 27 80]
Nov 21 22:25:48 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:48 zm zmc_m19[31587]: message repeated 8 times: [ WAR [Discarding packet for unrecognised ssrc d3ebfc02]]
Nov 21 22:25:48 zm zmc_m19[31587]: WAR [Packet in sequence, gap 12]
Nov 21 22:25:48 zm zmc_m19[31587]: WAR [Discarding partial frame 37164, 1340 bytes]
Nov 21 22:25:48 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:48 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Nov 21 22:25:49 zm zmc_m19[31587]: WAR [Discarding packet for unrecognised ssrc d3ebfc02]
Code: Select all
Nov 24 22:45:01 zm zma_m19[30274]: ERR [Shared data not initialised by capture daemon for monitor CAM-19-Dylan]
Nov 24 22:45:01 zm zmdc[31477]: ERR ['zma -m 19' exited abnormally, exit status 255]
Code: Select all
rtsp://<username>:<pwd>@<ip-address>:554/videoMain does not seem to be working. It is however working when is setup it up as RTSP/Unicast.
We need more information than "no video" or just a couple of lines from the log to troubleshoot this. Please turn on Debug level 4 and show a full page of log entries. I have yet to see a log file with too much information. Please describe the hardware you are running on. All modern Intel/AMD cpus should get a performance boost with 32bit colorspace.If you are using something like a Raspberry PI then you are likely running out of space on /dev/shm.1) As soon as i set this to 32bit i don`t get any video
That's because you are running on an old version of ZoneMinder. 1.30.0 is the latest.2) When i click the red help button i only get the text "OPTIONS_MAXFPS" without any explenation (for now i removed the limits)
Telling us no video is not helpful. Please show us screenshots of the general and source tabs of the monitor in question after setting the source type to ffmpeg. Also need to see a full page of log entries. Like all the others have told you previously, the ffmpeg source type is what you should be using.3) I never used ffmpeg before, and when i try to setup it up i don`t get any video
This is typical of most budget IP cameras4) The camera seems to have a limit of MAX=1 client per RTSP stream
You need to set the framerate in the camera to something lower, try 5 fps. This is plenty for general surveillance. Make sure you have nothing in the MAX FPS and MAX ALARM FPS fields. Failure to do this will cause problems with the stream.5) The framerate of the camera is set to 23 for the videoMain and to 15 for the videoSub