Very long duration events

Forum for questions and support relating to the 1.27.x releases only.
Locked
basketcase
Posts: 31
Joined: Thu Aug 22, 2013 10:04 pm

Very long duration events

Post by basketcase »

Hey Hey,

I've upgraded to 1.27.0 for a while, and on a month view I have a number of super long duration events, that won't play back.

Most play back just fine, all my monitors are set to 300 seconds and 99% of events are just that.

then there's these:
Image

The frame counts on the 1000+ second events are in the ball park of a 300 second events and most of my cams are 15FPS.

Any ideas why some might blow out, especially when there is no movement on the motion detection?

Cheers
Dave
TheKorn
Posts: 142
Joined: Fri Aug 02, 2013 12:39 pm

Re: Very long duration events

Post by TheKorn »

How many digits are you using for your image files? If it's three (the default), that's probably your problem.
basketcase
Posts: 31
Joined: Thu Aug 22, 2013 10:04 pm

Re: Very long duration events

Post by basketcase »

Not a config item I've seen before, updated to 4 as no events in the last month have more than 4500 frames.

No ill effects after a restart, will monitor ongoing.

Thanks for the tip!
PacoLM
Posts: 971
Joined: Wed Dec 02, 2009 9:55 pm
Location: Spain

Re: Very long duration events

Post by PacoLM »

TheKorn wrote:How many digits are you using for your image files? If it's three (the default), that's probably your problem.
This does not have nothing to do...!!!

After more than 15 years, no longer using ZM as surveillance system.
Now in the dark side, using a commercial system...
Locked