Half display

[alexg_ht]

I am running ZM on an Ubuntu box with ACTI ACM 4201 camera.

I am only getting half a screen on ZM when displaying the monitor (top half has half the image and the bottom half is black). The camera is set at 640x480 and the only way I can display the half image is if I set ZM at 320x240.

If I use ffplay, then I am getting the full 640x480.

I have been trying to solve this problem for a week now.

Any help would greatly be appreciated. Thanks.

[robert999]

What happens if you set the camera and ZM both to 320x240?

Are you seeing a lot of shared memory errors in the zmwatch.log?

[alexg_ht]

What happens if you set the camera and ZM both to 320x240?

Are you seeing a lot of shared memory errors in the zmwatch.log?

If I set both ZM and camera to 320x240, then I get two small images replicated horizontally on my monitor. But the two images are whole images.

There is no memory error on the zmwatch.log.

Thanks.

[PacoLM]

Hi,

Could be a crazy idea...change the state of the Options::Config V4L_MULTI_BUFFER value?.

Regards,

PacoLM

[grndamgt4]

Hello, I know this is an old thread but was the issue resolved?
My system has been working without error for almost 2 years and in the last month it started only showing the top 1/4 of the image. It does this both when viewing the camera and when viewing saved events.
I do not remember making any changes.
Thanks all

[marjanko2]

I think i have similar problem, when i plug one camere on my easycap there is normal picture and it works fine, but when I configure camera two on easycap then picture starts to jump like on attachet picture one and two and after a minute i get a screen like on attachet picture three. I have fresh install of ubuntu server 10.10 and zoneminder 1.24.4. And I can't get it work

Any solution, please?

Picture 1

picture1_364x480.jpg (32.97 KiB) Viewed 4159 times

Picture 2

picture2_364x480.jpg (36.05 KiB) Viewed 4159 times

Picture 3

picture3_315x480.jpg (16.72 KiB) Viewed 4159 times

[bb99]

Did you disable Options::Config V4L_MULTI_BUFFER value? I'm not familiar with "easycap" but maybe try changing "CAPTURES_PER_FRAME" to a value of 2. Worth a try anyway.

[marjanko2]

Didn't work
zmwatch.log has an error:

12/07/11 15:03:20.239226 zmwatch[1548].ERR [Shared data size conflict in shared_data for monitor Monitor-1, expected 328, got 316]
12/07/11 15:03:20.241191 zmwatch[1548].ERR [Shared data size conflict in shared_data for monitor Monitor-8, expected 328, got 316]

any idea???

TNX!

[bb99]

Ignore my post against your other post. Best I'm going to be able to help with is: http://www.zoneminder.com/forums/search ... mit=Search

Maybe one result will help.