Events only 9 to 10 seconds

Discussions related to the 1.36.x series of ZoneMinder
Post Reply
Detlef Paschke
Posts: 26
Joined: Tue Sep 12, 2023 6:14 pm

Events only 9 to 10 seconds

Post by Detlef Paschke »

Hello,

I have the problem with Zoneminder that events are only recorded in the 9 to 10 second range and are canceled in the middle of the movement.
In the buffer settings I had already set the pre-event and post-event buffers to 5 seconds but that didn't help either.
Currently only one camera works with Modect in the sub-stream and Nodect in the mainstream.

Now I have a nice example where you can see that two consecutive events even overlap. So it's an event that is "chopped" by Zoneminder.

Code: Select all

Ereignis-ID		5870
Ereignisname		Event-5870
Monitor-ID		1
Monitorname		Annke_C500-SD
Grund			Motion
Bemerkungen
Start Time		22.12.23, 22:47:59 MEZ
End Time		22.12.23, 22:48:08 MEZ
Dauer			9.28
Bilder			94
Alarmbilder		20
Gesamtwertung		26
Mittlere Wertung	1
Maximale Wertung	2
DiskSpace		121.71kB
Storage			Default
Archivierte		Nein
Emailed			Nein

Ereignis-ID		5872
Ereignisname		Event-5872
Monitor-ID		1
Monitorname		Annke_C500-SD
Grund			Motion
Bemerkungen
Start Time		22.12.23, 22:48:07 MEZ
End Time		22.12.23, 22:48:16 MEZ
Dauer			9.29
Bilder			94
Alarmbilder		13
Gesamtwertung		13
Mittlere Wertung	1
Maximale Wertung	1
DiskSpace		122.45kB
Storage			Default
Archivierte		Nein
Emailed			Nein
At the same time, I'm currently testing Zoneminder 1.37.47 and there too, only 10 second events are created.

Many greetings
Detlef Paschke
Post Reply