Link to wrong/not existing monitor then creating new zone

Current Development version likely to have breaking changes
Post Reply
Pjoms
Posts: 12
Joined: Fri Jan 14, 2022 12:05 pm

Link to wrong/not existing monitor then creating new zone

Post by Pjoms »

I have just made a new installation of v1.37.40 on Ubuntu 22.04 for test purpose on a virtual machine and are facing an interesting issue.
Installation was done by following the Installation Guide

Setup: Two monitors installed (one camera, two streams). The monitors have Id:1 and Id:2.
Issue: Then I try to add a new zone for any monitor the browser link points to monitor mid=5 which of course will fail as I only have Id:1 and Id:2.
Workaround: If I change mid=5 to mid=1 or mid=2 in the browser link it works as expected and I can add the zone.

Anyone experienced the same and/or have some ideas what can cause this behavior, and what to do?
I have another old "production" installation on another virtual machine upgraded to v1.37.40 that works just fine.

/Anders
User avatar
iconnor
Posts: 2862
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Link to wrong/not existing monitor then creating new zone

Post by iconnor »

That's pretty weird. Not seeing it here. This is the link in the zones column on the console?
Pjoms
Posts: 12
Joined: Fri Jan 14, 2022 12:05 pm

Re: Link to wrong/not existing monitor then creating new zone

Post by Pjoms »

It´s the link I came to after pressing the button "+Add new zone".
I maybe also may mention that I have the latest stable Event Server installed from this guide, but I´m not using it right now.
User avatar
iconnor
Posts: 2862
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Link to wrong/not existing monitor then creating new zone

Post by iconnor »

Confirmed. Hard coded 5. Fixed. New packages building.
Pjoms
Posts: 12
Joined: Fri Jan 14, 2022 12:05 pm

Re: Link to wrong/not existing monitor then creating new zone

Post by Pjoms »

Thanks, working now after update.
Post Reply