See the screen shots for my hardware and my high load.
I have both cameras set to 10fps.
Thoughts suggestions on my high load???
-
- Posts: 54
- Joined: Mon Aug 26, 2019 12:42 pm
Re: Thoughts suggestions on my high load???
1) Use H264 passthrough instead of JPEG or H264 encode.
2) Disable prefetch mitigations, see: http://forums.zoneminder.com/viewtopic.php?f=11&t=28292
3) Make detection zones smaller.
2) Disable prefetch mitigations, see: http://forums.zoneminder.com/viewtopic.php?f=11&t=28292
3) Make detection zones smaller.
-
- Posts: 54
- Joined: Mon Aug 26, 2019 12:42 pm
Re: Thoughts suggestions on my high load???
H264 pass through set on the cameras has me at 1.09 load now.
-
- Posts: 54
- Joined: Mon Aug 26, 2019 12:42 pm
Re: Thoughts suggestions on my high load???
One camera has glitchy video recording, like half the screen.
I turned passthrough off and it went away.
It is also set at 10fps.
Is that normal?
I turned passthrough off and it went away.
It is also set at 10fps.
Is that normal?
Re: Thoughts suggestions on my high load???
See: http://forums.zoneminder.com/viewtopic.php?f=38&t=28339
Streaming errors are camera make/model dependent. One of these days I'll get a book on H264. There's a lot of them, just need to find one well written.
What is the make / model of the camera?
Streaming errors are camera make/model dependent. One of these days I'll get a book on H264. There's a lot of them, just need to find one well written.
What is the make / model of the camera?