PTZ Controls not working

cknox · Post by **cknox** » Mon Mar 10, 2008 8:59 pm

Interesting: I made the changes to the zmcontrol.pl as suggested. I also put a leading forward slash (/) in front of the Control Address on the monitor configuration control tab /camera ip address:port. Finally, I edited the protocol path in Control Capabilities. Now, when I click on any control arrow, a box titled "The page at http://localhost says:" appears:

Control response was status = 255
Message =

Of course, this is a less than optimal situation, but it is the first time I've ever gotten a response of any kind. Maybe I'm on the right track?

hrabe · Post by **hrabe** » Mon Mar 10, 2008 9:08 pm

No, control addr is for example:
admin:password@192.168.39.211:80
control device I have empty

cknox · Post by **cknox** » Mon Mar 10, 2008 9:21 pm

I have that on the "Remote Host Name."

hrabe · Post by **hrabe** » Mon Mar 10, 2008 10:29 pm

The way is open cam with the web browser, run packet sniffer and look for PTZ commands.

cknox · Post by **cknox** » Thu Mar 20, 2008 4:33 am

Re-built Linux system and re-installed ZoneMinder 1.23.2. Zoom doesn't work and theres a video delay.

cknox · Post by **cknox** » Thu Mar 20, 2008 9:11 pm

Response issue on Pan/Tilt corrected by increasing frame rate & reducing buffer to 10.

xaviertirado · Post by **xaviertirado** » Wed Apr 02, 2008 5:08 pm

I have Axis 213 but couldnt get to move...

jchhay007 · Post by **jchhay007** » Sun Mar 22, 2009 4:59 am

Has anyone got Zoom function to work Panasonic IP WV-NS202a with ZM 1.23.1?

ZoneMinder Forums

PTZ Controls not working

Fixed (for the most part)

Axis 213

WV-NS202A can pan and tilt using PanasonicIP control module