Why is rows per page up to 200 and then all

Discussions related to the 1.36.x series of ZoneMinder
px03afk
Posts: 77
Joined: Wed Nov 30, 2011 4:53 pm

Re: Why is rows per page up to 200 and then all

Post by px03afk »

I think having several options is worth having rather than the old one where you had to go to options to make a change so the general principle is good. However adding the facility to set your own values would be very helpful.
px03afk
Posts: 77
Joined: Wed Nov 30, 2011 4:53 pm

Re: Why is rows per page up to 200 and then all

Post by px03afk »

Following a previous comment about deleting files from disc, that is what I did yesterday as I have over 2000 to remove. I have zmaudit running but it had not tidied up the database and I had to run it from a command prompt to remove the database entries.
User avatar
knight-of-ni
Posts: 2404
Joined: Thu Oct 18, 2007 1:55 pm
Location: Shiloh, IL

Re: Why is rows per page up to 200 and then all

Post by knight-of-ni »

We recommend running zmaudit from a cron job, rather than enabling it in the web options.
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/
px03afk
Posts: 77
Joined: Wed Nov 30, 2011 4:53 pm

Re: Why is rows per page up to 200 and then all

Post by px03afk »

Thank you for that little nugget. I'll move zmaudit to cron.
Post Reply