PTZ NoName Cameras
Posted: Sun Jul 12, 2020 2:07 pm
If I am in the wrong place I apologize.
Zoneminder running in a docker on Unraid
Hello,
I have many Onvif Chinese Cameras, all of them, but one has HTTP access to "IP Camera" and use the CamHi app.
I have a new one that does not have HTTP access and uses the Icsee app, if I go to the IP address on a pc it installs an app NetSurveillance WEB.
I want to get PTZ working in Zoneminder, but have not been able to figure this out.
For my CamHi cams, the source path that I use is rtsp://xxxxxx:xxxxxx@192.168.1.11:554/1
For my Icsee cam the source path that I use is rtsp://192.168.1.18:554/user=admin_password=6QNMIQGe_channel=1_stream=0.sdp?real_stream
Onvif device manager controls the PTZ on all of my PTZ cams.
The cameras controlled by Camhi respond to PTZ commands from CamHi, HTTP and OnvifDM
The cameras controlled by Icsee respond to PTZ commands from Icsee, HTTP and OnvifDM
Thanks for any help provided.
Chas
Zoneminder running in a docker on Unraid
Hello,
I have many Onvif Chinese Cameras, all of them, but one has HTTP access to "IP Camera" and use the CamHi app.
I have a new one that does not have HTTP access and uses the Icsee app, if I go to the IP address on a pc it installs an app NetSurveillance WEB.
I want to get PTZ working in Zoneminder, but have not been able to figure this out.
For my CamHi cams, the source path that I use is rtsp://xxxxxx:xxxxxx@192.168.1.11:554/1
For my Icsee cam the source path that I use is rtsp://192.168.1.18:554/user=admin_password=6QNMIQGe_channel=1_stream=0.sdp?real_stream
Onvif device manager controls the PTZ on all of my PTZ cams.
The cameras controlled by Camhi respond to PTZ commands from CamHi, HTTP and OnvifDM
The cameras controlled by Icsee respond to PTZ commands from Icsee, HTTP and OnvifDM
Thanks for any help provided.
Chas