Filter will not move events

Forum for questions and support relating to the 1.34.x releases only.
Post Reply
Sean298
Posts: 6
Joined: Tue Oct 13, 2020 12:07 pm

Filter will not move events

Post by Sean298 »

I have a filter setup to move events to another storage if disk percent is over 65, I lowered the percentage to test it and nothing moved, it does not log any errors that I see, it simply presents the list of events.

If I remove "disk percent greater than", I am able to move from or to either disk

I see also that I am continuously gaining new filter ID's that are running, I am up to 55 currently.

I'm at a loss, I had used this filter for a long time on my previous install

Thanks again all.
Attachments
Screenshot 2022-01-17 123348.png
Screenshot 2022-01-17 123348.png (87.5 KiB) Viewed 4121 times
Magic919
Posts: 866
Joined: Wed Sep 18, 2013 6:56 am

Re: Filter will not move events

Post by Magic919 »

Turn off concurrently.
-----------------------------------------------------------------------
I'm nothing to do with ZM, ZMNinja or ZMES, I just use them.
Contribute funding to the devs here - https://opencollective.com/zoneminder
Sean298
Posts: 6
Joined: Tue Oct 13, 2020 12:07 pm

Re: Filter will not move events

Post by Sean298 »

Nope, my brother and I watched the debug of the filter, disc percent is getting the percentage without the hard drive metadata.

Zoneminder percentages include metadata but for some reason disc percent reads from a different spot.

Do I have a bad file somewhere I can fix?
Post Reply