Problem while Adding OnVif camera

Forum for questions and support relating to 1.33.x development only.
Post Reply
mahmoudalattar
Posts: 3
Joined: Mon Dec 30, 2019 4:37 pm

Problem while Adding OnVif camera

Post by mahmoudalattar » Mon Dec 30, 2019 5:43 pm

hello

iam trying to add my UNV IPC2125 OnVIF camera

it appears in detected cameras list
camera_select.JPG
camera_select.JPG (50.22 KiB) Viewed 700 times
but after selecting no profile is detected
detected_profile.JPG
detected_profile.JPG (32.02 KiB) Viewed 700 times
iam trying to add it manually

i can view camera on player with link:
rtsp://admin:123456@192.168.1.6:554

i have no experience with zoneminder
version is: 1.33.16

camera settings:
Camera.JPG
Camera.JPG (54.06 KiB) Viewed 700 times
Last edited by mahmoudalattar on Wed Jan 01, 2020 7:05 am, edited 1 time in total.

mahmoudalattar
Posts: 3
Joined: Mon Dec 30, 2019 4:37 pm

Re: peoblem while Adding OnVif camera

Post by mahmoudalattar » Mon Dec 30, 2019 5:44 pm

i tried these manual configuration but also not connected
zm setting 1.JPG
zm setting 1.JPG (61.58 KiB) Viewed 699 times
zm setting 2.JPG
zm setting 2.JPG (53.24 KiB) Viewed 699 times
Thanks

User avatar
snake
Posts: 334
Joined: Sat May 21, 2016 2:20 am

Re: peoblem while Adding OnVif camera

Post by snake » Mon Dec 30, 2019 10:30 pm

Remove max FPS on zoneminder. Leave blank.

Change method to TCP.

You can use FFMPEG or LibVLC for rtsp.

Test in ffmpeg from command line, to get resolution and confirm it works.

See https://wiki.zoneminder.com/Finding_Camera_Stream_Paths

If you are on RPI, lower FPS on camera.

mahmoudalattar
Posts: 3
Joined: Mon Dec 30, 2019 4:37 pm

Re: peoblem while Adding OnVif camera

Post by mahmoudalattar » Mon Dec 30, 2019 11:03 pm

thanks for response

this configuration worked but not stable

how can i make it better?
Config2.JPG
Config2.JPG (52.95 KiB) Viewed 678 times
Config1.JPG
Config1.JPG (60.29 KiB) Viewed 678 times
Camera1.JPG
Camera1.JPG (50.25 KiB) Viewed 678 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests