DS-2DE3304W-DE PTZ

[joeCarmon]

Has anybody gotten the Hikvision DS-2DE3304W-DE to work for PTZ? I have been struggling with this for quite some time. The camera streams, but I am unable to control it.

[joeCarmon]

Minor Update. I have set it for ONVIF, and think I am on the right track, but am getting http::80 (Bad hostname) in the error log for zmcontrol.

[joeCarmon]

Bumping to see if anybody has any ideas.

[security_dude]

I have it working on my machine. Make sure you are using this syntax under the control tab for the control address.

userid:password@server IP:port number

For example admin:passwrod@192.168.1.200:80

Did you create a script for it yet? The control device under the same tab should be your script name. Hope this helps.

[rockedge]

does the Hikvision.pm work for these DS-2DE3304W-DE cameras?

Are the control commands correct in the control script?

[security_dude]

PM sent with modified script for you to try out.

[rockedge]

Thanks! I am reviewing some of the different control scripts so this info helps!

[kobold81]

Hi,

I have the DS-2DE2A404IW-DE3 working with the HikVision script provided by zoneminder.

Control Device: DS-2DE2A404IW-DE3
Control Address: admin:Password@10.10.4.21

Control Type: HikVision
Then click "Edit" next to Control Type.
Move: I clicked everything on
I entered Values at Pan, Tilt, zoom and clicked zoom on on.

I am still trying to figure out if a change in e.g. Pan steps dies anything

[kingsize]

I have it working on my machine. Make sure you are using this syntax under the control tab for the control address.

userid:password@server IP:port number

For example admin:passwrod@192.168.1.200:80

Did you create a script for it yet? The control device under the same tab should be your script name. Hope this helps.

Thank you for posting. Can finally control my two from zm.