Negative Event Count

Forum for questions and support relating to 1.33.x development only.
Post Reply
geraldbrandt
Posts: 65
Joined: Tue Dec 09, 2014 10:20 pm

Negative Event Count

Post by geraldbrandt » Mon Dec 17, 2018 2:46 pm

I just upgraded from 1.32.2 and got 1.33.0. Didn't expect it, but my fault for not changing my repo. No big deal, I don't mind testing.

One of my cameras has a negative event count of -7 and a negative size value. When I record an event, the count goes to -6, etc.

What can I do on my end to help you figure it out (if you need help)?

Gerald

rockedge
Posts: 1034
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA
Contact:

Re: Negative Event Count

Post by rockedge » Mon Dec 17, 2018 3:56 pm

I see this same occurrence only when I compile ZM 1.33.0 from source. When I use the iconner PPA the negative event counts and zero zones being displayed do not happen.

geraldbrandt
Posts: 65
Joined: Tue Dec 09, 2014 10:20 pm

Re: Negative Event Count

Post by geraldbrandt » Mon Dec 17, 2018 7:42 pm

I upgraded from the iconnor ppa.

User avatar
knight-of-ni
Posts: 2209
Joined: Thu Oct 18, 2007 1:55 pm
Location: Shiloh, IL

Re: Negative Event Count

Post by knight-of-ni » Mon Dec 31, 2018 4:35 pm

Isaac and I have seen this too, but not on every system we are running.
It seems to right itself over time, which actually makes it harder to troubleshoot.

Added to our task list:
https://github.com/ZoneMinder/zoneminder/projects/2
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/

geraldbrandt
Posts: 65
Joined: Tue Dec 09, 2014 10:20 pm

Re: Negative Event Count

Post by geraldbrandt » Fri Jan 04, 2019 9:37 pm

My system is still showing -8 when there are no events. Is there anything I can do to help debug this?

Gerald

User avatar
knight-of-ni
Posts: 2209
Joined: Thu Oct 18, 2007 1:55 pm
Location: Shiloh, IL

Re: Negative Event Count

Post by knight-of-ni » Sun Jan 06, 2019 6:14 pm

Try this:
viewtopic.php?f=38&t=27886#p108869

Verify all three timezones are reporting the same offset.

Then also try re-running zmupdate in the manner shown here:
viewtopic.php?f=38&t=27622&p=108402&hil ... .4#p108402

At the moment, we still have not determined the cause.
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest