ReoLink RLC-420-5MP connection

Forum for questions and support relating to the 1.32.x releases only.
Post Reply
rtalada
Posts: 1
Joined: Tue Jan 07, 2020 3:39 pm

ReoLink RLC-420-5MP connection

Post by rtalada »

Here is how I have the camera setup in my environment

First thing to do is define the IP address.
I found that adding the device to dhcp using manual allocation worked quite well considering that no initial IP address was provided.

Log on to the camera using the assigned IP address
Username: admin
no password

Camera variables:
Basic Settings:
Stream: Clear
Resolution: 2048 x 1536
Frame Rate: 30
Max Bitrate: 6144
H.264 Profile: Main
Stream: Fluent
Resolution: 640 x 480
Frame Rate: 10
Max Bitrate: 160
H.264 Profile: Main

Zoneminder Variables:
General:
Source Type: Ffmpeg
Max FPS (?): null
Alarm Max FPS (?): null
Source:
Source Path: rstp://{username:password}@{IPaddress}
Method (?): TCP
Options (?): /h264Preview_01_main
Capture Width: 640
Capture Height: 480
banzaay
Posts: 12
Joined: Fri Feb 15, 2019 4:18 pm

Re: ReoLink RLC-420-5MP connection

Post by banzaay »

Hi,

I have configured the Reolink RLC-511W, this is my configuration:

Zoneminder Variables:
  • General:
Source Type: Ffmpeg
Max FPS (?): null
Alarm Max FPS (?): null
  • Source:
Source Path: rtsp://admin:PWD@192.168.1.51/h264Preview_01_sub (this is for the Stream Fluent,ohterwise you can use rtsp://admin:PWD@192.168.1.51/h264Preview_01_main with resolution 2560x1920)
Method (?): TCP
Options (?): null
Capture Width: 640
Capture Height: 480

Mirko
FFRRRR
Posts: 3
Joined: Tue Nov 03, 2020 9:34 am

Re: ReoLink RLC-420-5MP connection

Post by FFRRRR »

here is a detailed configuration process I find in the reddit. May it helps you.
https://www.reddit.com/r/reolinkcam/com ... inder_nvr/
Post Reply