Thoughts suggestions on my high load???

[homebrewdude]

See the screen shots for my hardware and my high load.

I have both cameras set to 10fps.

Screenshot from 2019-11-22 16-35-41.png (69.84 KiB) Viewed 1876 times

Screenshot from 2019-11-22 16-33-25.png (55.57 KiB) Viewed 1876 times

[snake]

1) Use H264 passthrough instead of JPEG or H264 encode.

2) Disable prefetch mitigations, see: http://forums.zoneminder.com/viewtopic.php?f=11&t=28292

3) Make detection zones smaller.

[homebrewdude]

H264 pass through set on the cameras has me at 1.09 load now.

[homebrewdude]

One camera has glitchy video recording, like half the screen.

I turned passthrough off and it went away.

It is also set at 10fps.

Is that normal?

[snake]

See: http://forums.zoneminder.com/viewtopic.php?f=38&t=28339

Streaming errors are camera make/model dependent. One of these days I'll get a book on H264. There's a lot of them, just need to find one well written.

What is the make / model of the camera?