Hikvision 3304 PTZ`

Forum for questions and support relating to the 1.32.x releases only.
Post Reply
carmonj
Posts: 2
Joined: Sat Jan 19, 2019 10:55 pm

Hikvision 3304 PTZ`

Post by carmonj »

All,

I have a hikvision DS-2DE3304 DE. I have the video operational, but I am unable to get the PTZ controls working. I have enabled the control under the control tab. I have entered the control URL admin:adminpassword@192.168.1.64:88. When I attempt to move the camera I get the following error.

control response was status = undefined

Any help would be appreciated.
carmonj
Posts: 2
Joined: Sat Jan 19, 2019 10:55 pm

Re: Hikvision 3304 PTZ`

Post by carmonj »

Just bumping to see if anybody has any ideas?
rockedge
Posts: 1173
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA

Re: Hikvision 3304 PTZ`

Post by rockedge »

which ptz control script are you using?
pennyzm
Posts: 27
Joined: Wed Oct 10, 2018 7:59 pm

Re: Hikvision 3304 PTZ`

Post by pennyzm »

I'm looking at getting some hikvision ptz cameras, were you able to get the ptz working for your camera?
security_dude
Posts: 23
Joined: Sun Oct 07, 2018 6:55 pm

Re: Hikvision 3304 PTZ`

Post by security_dude »

You should be using port 80 not 88 if your camera is set to default.
Post Reply