Page 1 of 1

Outline/Box around detected motion

Posted: Mon Jan 14, 2019 11:19 am
by Tomm
I had the outline of detected motion active in 1.30, now that i migrated to 1.32.3 i can't get it to work.
For motion frames, there is only a red square around the frame border, but nothing indicating the alarmed blobs.

I have the "Options>Config>CREATE_ANALYSIS_IMAGES" enabled.

Here's the zone :

Code: Select all

Name	Terras
Type	Active
Units	Pixels
Alarm Colour (Red/Green/Blue)	255 /  0 /  0
Alarm Check Method	Blobs
Min/Max Pixel Threshold (0-255)	80 255
Filter Width/Height (pixels)	5 5
Zone Area	499673
Min/Max Alarmed Area	160 50000
Min/Max Filtered Area	130 0
Min/Max Blob Area	130 0
Min/Max Blobs	1 
Overload Frame Ignore Count	0
Extend Alarm Frame Count	0
What am I missing ?

Re: Outline/Box around detected motion

Posted: Tue Jan 15, 2019 8:21 pm
by Tomm
can I add some info, to get more traction in this forum ?

[SOLVED] Outline/Box around detected motion

Posted: Fri Jan 18, 2019 10:16 am
by Tomm
I found what was causing the lack of analysis frames.

Re: Outline/Box around detected motion

Posted: Fri Jan 18, 2019 11:39 am
by MJN
Can you share what it was to help others with the similar issue that might stumble across this thread?

Re: Outline/Box around detected motion

Posted: Fri Jan 18, 2019 3:36 pm
by SkippyDo