Load issues

Forum for questions and support relating to the 1.32.x releases only.
Post Reply
scarygary
Posts: 10
Joined: Sat Sep 15, 2018 4:51 pm

Load issues

Post by scarygary »

I've got zoneminder running on a Lenovo Thinkstation E31 with an Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 4 cores and 4GB DDR3 ram. Two mirrored 1TB SATA disks in a software raid using mdadm. After upgrading zoneminder to 1.32 from 1.30 the system load went from around 1 to in some cases around 4. 15 mostly low-res cameras all doing modect. I need to figure out what caused this increase but I don't know where to start.
adot
Posts: 10
Joined: Sat Apr 08, 2017 10:06 am

Re: Load issues

Post by adot »

Same here.
Upgraded from 1.30.4 to 1.32 and all of a sudden avg Load went from ~2 to ~15 with just 4 IP Cams.
No hint.
adot
Posts: 10
Joined: Sat Apr 08, 2017 10:06 am

Re: Load issues

Post by adot »

Not yet sure if related, but you might check this post:
viewtopic.php?f=38&t=27518&p=107119#p107097

After editing my MySQL 5.7 my.cnf the load is back to regular level for the last couple of hours, but am still monitoring.
A.
scarygary
Posts: 10
Joined: Sat Sep 15, 2018 4:51 pm

Re: Load issues

Post by scarygary »

After changing my.cnf the load went down to on average 2.5. Not great, but a lot better.
Post Reply