State go to Inactive

Forum for questions and support relating to the 1.31.x releases only.
Locked
jamigf
Posts: 13
Joined: Mon Mar 05, 2018 10:31 am

State go to Inactive

Post by jamigf »

Hi I have a Zoneminder 1.31.1 running.
All works but after some minutes of hours the state of zoneminder go from running to inactive and I cannot see the live from cameras??
Can you say me why this happen??

Thank you so much
bbunge
Posts: 2930
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: State go to Inactive

Post by bbunge »

What does the log tell you? Did your server run out of memory?
jamigf
Posts: 13
Joined: Mon Mar 05, 2018 10:31 am

Re: State go to Inactive

Post by jamigf »

It is possible the system go to inactive for load? I see the load go to over 8.0....
It is an intel atom 1.33Ghz 1 core...
rockedge
Posts: 1173
Joined: Fri Apr 04, 2014 1:46 pm
Location: Connecticut,USA

Re: State go to Inactive

Post by rockedge »

the load is 8 with a single core CPU?? Wow..yes that does indicate something. Is the server memory is overflowing. what does the /dev/shm numbers look like?
jamigf
Posts: 13
Joined: Mon Mar 05, 2018 10:31 am

Re: State go to Inactive

Post by jamigf »

/dev/shm is near 100%.....
so the problem is the Ram??
Locked