Just installed ZM, cams detected but all I see is a broken tiny icon where the image should be

Forum for questions and support relating to the 1.31.x releases only.
Post Reply
bermudafox
Posts: 1
Joined: Fri Feb 09, 2018 1:33 am

Just installed ZM, cams detected but all I see is a broken tiny icon where the image should be

Post by bermudafox » Fri Feb 09, 2018 1:37 am

I am new to linux but I think the install went as expected.
I created two monitors for the cameras I have when I go to the camera I just see a broken tiny icon at the top,
Any help welcome.
Thanks.

bbunge
Posts: 2444
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: Just installed ZM, cams detected but all I see is a broken tiny icon where the image should be

Post by bbunge » Fri Feb 09, 2018 2:49 am

Linux distro and version. Version of Zoneminder. Instructions used to install Zoneminder?

User avatar
kingofkya
Posts: 1111
Joined: Mon Mar 26, 2007 6:07 am
Location: Las Vegas, Nevada

Re: Just installed ZM, cams detected but all I see is a broken tiny icon where the image should be

Post by kingofkya » Sun Feb 11, 2018 2:06 am

Ubuntu by chance? I just had this same issue. if you right click on the broken image and view it.

you should get something like this http://10.0.0.206/zm/cgi-bin/nph-zms?... or do you get something like http://10.0.0.206/cgi-bin/nph-zms

If its the latter go to Options --> Paths --> path_ZMS and change /cgi-bin/nph-zms to /zm/cgi-bin/nph-zms and if its the same as my issue it will be fixed.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests