Track Motion Configuration

Forum for questions and support relating to the 1.30.x releases only.
Locked
vbo68
Posts: 7
Joined: Thu Apr 12, 2012 3:43 am

Track Motion Configuration

Post by vbo68 »

Hi,

I have mannaged to add the moveMap function for the HikVision PTZ Cameras, and it works when looking at the monitor, the PTZ funcion activates correctly and recenters the image where I clicked.

But When activating the Track Motion option in the Control Tab of the monitor, the zmtrack.pl can be seen on the running processes but nothing happens when a motion is detected, the camera does not recenter itself to where the motion was detected... is there somewhere else a parameter i might have missed ? Or did I missunderstood this feature ?

Many thanks !
vbo68
Posts: 7
Joined: Thu Apr 12, 2012 3:43 am

Re: Track Motion Configuration

Post by vbo68 »

So... Nobody ever managed to have the Motion tracking to work ?
JasonBorn
Posts: 37
Joined: Fri Jan 08, 2021 5:31 pm

Re: Track Motion Configuration

Post by JasonBorn »

Any news on this?
Magic919
Posts: 1381
Joined: Wed Sep 18, 2013 6:56 am

Re: Track Motion Configuration

Post by Magic919 »

I would assume it doesn’t work. It’s a feature that would need a lot of work and that goes beyond tracking, as it would need to suspend motion detection, for example. Even basic control is a bit hit and miss in ZM.

As with all things, people can vote with their money. Get on Bountysource and make it worth doing.
-
JasonBorn
Posts: 37
Joined: Fri Jan 08, 2021 5:31 pm

Re: Track Motion Configuration

Post by JasonBorn »

Just found a video on youtube. Shinobi has this feature.
https://www.youtube.com/watch?v=uD-Ksgtp1Pc
Locked