Page 1 of 1

Problemas GV-600 y Pico 2000

Posted: Tue Feb 21, 2017 10:11 pm
by cobrazzi
Hola gente tengo 2 placas una GV-600 v.3 de 16 puertos y una pico 2000 hace semanas vengo tratando de instalarlas con zoneminder y me es imposible, he probado con debian, ubuntu, mint, fedora, mandriva, ninguna reconoce las placas, he modificado en base a lecturas el bbtv colocando los parametros de las capturadorassin exito.

baje zmlarch y me reconocio en zoneminder al iguan que lo habia hecho debian 7, el problema es que solo me detecta 1 camara de las 4 que tengo, todas son analogicas, no poseo camaras IP.

sinceramente no encuentro solucion. si alguno podria ayudarme se lo agradecere.


xxxxxxxxxxxxxxxxxxxx

Hi everyone, I have 2 plates with a GV-600 v.3 of 16 ports and a 2000 peak for weeks I've been trying to install them with zoneminder and it's impossible, I've tried with debian, ubuntu, mint, fedora, mandriva, I have modified on the basis of readings the bbtv placing the parameters of the catcherin successful.

I downloaded zmlarch and it recognized me in zoneminder to the iguan that I had done debian 7, the problem is that only I detected 1 camera of the 4 that I have, all are analogical, I do not have IP cameras.

I sincerely do not find a solution. If anyone could help me thank you.

Re: Problemas GV-600 y Pico 2000

Posted: Wed Feb 22, 2017 1:47 am
by iconnor
The pico 2000 will show up as 1 device, with 4 channels.

To help you further we are going to need the output of...

lspci
dmesg

and whatever module settings you have tried for the gv-600.

Re: Problemas GV-600 y Pico 2000

Posted: Wed Feb 22, 2017 2:44 pm
by cobrazzi
Gracias por la pronta respuesta

instalada ahora Pico 2000 me muestra una sola cámara ej: de configuración

source: /dev/video0
divice chanel: 0
format: NTSC

y todo ok veo la cámara

si agrego monitores ej:

source: /dev/video0
divice chanel: 1
format: NTSC

veo la misma cámara

source: /dev/video0
divice chanel: 2
format: NTSC

source: /dev/video0
divice chanel: 3
format: NTSC

y si lo hago sucesivamente las otras 2 no las veo


[user ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
04:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
04:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
[user ~]$