Corrupted images for only 1 camera on 3 why?!

Forum for questions and support relating to the 1.29.x releases only.
Post Reply
User avatar
Tarucan
Posts: 2
Joined: Tue Nov 08, 2016 11:33 am

Corrupted images for only 1 camera on 3 why?!

Post by Tarucan » Tue Nov 08, 2016 12:08 pm

Good Day, i have:
- Zoneminder 1.29,0, installed by release on Ubuntu 16.04.1 LTS (GNU/Linux 4.4.0-45-generic x86_64)
- installed from: https://www.zoneminder.com/downloads
log: http://www.lianna.it/imgxforums/zm/log.txt


I have 3 cameras:
Foscam FI9900P
System Firmware Version 1.11.1.6
Application Firmware Version 2.74.1.18
Plug-In Version 3.3.0.8

2 work fine, 1 not. it give shit quality images and many times totally corrupt, but if i watch the camera with its own webui directly to his ip, it show perfect and smooth images always. i attach now the 2 screenshoot grabbed in the exact moment through zoneminder and camera webui.
What drive me crazy is that only 1 camera on 3 do this but i use same config for all on zoneminder.

Image
Image
Image
Image
Image
Image
Image

haus
Posts: 195
Joined: Thu Oct 11, 2007 5:10 am

Re: Corrupted images for only 1 camera on 3 why?!

Post by haus » Mon Nov 14, 2016 10:45 pm

I had this issue on some of my Amcrest (formerly foscam?) cameras. Try lowering the bit rate and key frame interval in the camera settings. For mine I'm using 1280x720, key frame interval of 8 and 512 to 1024kbps depending on the camera (go too low and the image quality really suffers though). Zoneminder I've only seen tearing once or twice since doing that.

User avatar
Tarucan
Posts: 2
Joined: Tue Nov 08, 2016 11:33 am

Re: Corrupted images for only 1 camera on 3 why?!

Post by Tarucan » Wed Nov 16, 2016 8:45 am

I sloved the bug restarting ZM.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests