ZoneMinder Forums

Posted: **Fri Oct 16, 2015 7:39 am**

Hello all,

Doing a fresh install on Ubuntu 14.04 using 1.28.107 from the iconnor PPA repo.

Having an issue figuring out which control script to use with my Foscam 8910W - the 8908W script moves the cam but does not have presets enabled and when I do enable presets - I get the following error message:

Code: Select all

Can't access presetSet member of object of class ZoneMinder::Control::FI8908W

The 8918w script does not appear to move the camera at all regardless whether I change type from FFMPEG to remote... I get the following error messages:

Code: Select all

Error REALLY check failed:'401 Unauthorized'
Cmd:HTTP::Request=HASH(0x2cefe10)

So... any ideas? Or should I use the old script from http://www.zoneminder.com/wiki/index.php/Foscam_Clones

Thanks!

Posted: **Fri Oct 16, 2015 12:22 pm**

If I remember there is a script for a 8918 that works for the 8910. Go back a few months in this forum and there is a write up for it.

bb

Posted: **Fri Oct 16, 2015 1:19 pm**

http://www.zoneminder.com/forums/viewto ... 32&t=23305

Posted: **Fri Oct 16, 2015 5:06 pm**

After some trial and error - finally got it to work.

Thank you!!

ZoneMinder Forums

1.28.107 on Ubuntu - which control script to use for a 8910W

1.28.107 on Ubuntu - which control script to use for a 8910W

Re: 1.28.107 on Ubuntu - which control script to use for a 8

Re: 1.28.107 on Ubuntu - which control script to use for a 8

Re: 1.28.107 on Ubuntu - which control script to use for a 8