tinyCam Monitor stop to work after update to 1.28.106

Forum for questions and support relating to the 1.28.x releases only.
marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Fri Sep 25, 2015 9:15 am

Hi,
I just updated to 1.28.106, and tinyCam Monitor stop to work.
Error shown when tring to connect is "Socket is closed."

Thanks for any help.

Regards
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Fri Sep 25, 2015 4:14 pm

You should probably take this up with the tinyCam folks.
Note that 106 is not a stable release, so tinyCam may want to wait till it gets into a production (stable) release, but that is a conversation you should probably have with them
marcolino7 wrote:Hi,
I just updated to 1.28.106, and tinyCam Monitor stop to work.
Error shown when tring to connect is "Socket is closed."

Thanks for any help.

Regards
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Fri Sep 25, 2015 4:18 pm

Hi asker,
thanks for hel. I'll contact tinyCam.
Meanwhile I'll wait for zmNinja
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Fri Sep 25, 2015 4:20 pm

marcolino7 wrote:Hi asker,
thanks for hel. I'll contact tinyCam.
Meanwhile I'll wait for zmNinja
Oh - did you send me an email with the details?
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Fri Sep 25, 2015 4:30 pm

Yes sure,
I'm waiting for a reply. I would like to partecipate at beta testing if it possible.
Regards
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Fri Sep 25, 2015 4:33 pm

marcolino7 wrote:Yes sure,
I'm waiting for a reply. I would like to partecipate at beta testing if it possible.
Regards
I'm sorry, but I can't find any email from you. Please resend to pliablepixels at gmail
Please make sure you provide all the details as per http://www.zoneminder.com/forums/viewto ... 32&t=23073
Last edited by asker on Fri Sep 25, 2015 5:40 pm, edited 1 time in total.
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Fri Sep 25, 2015 4:40 pm

Lust sent the email
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Fri Sep 25, 2015 5:29 pm

marcolino7 wrote:Lust sent the email
Got it - I've sent you the invite
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

User avatar
knight-of-ni
Posts: 2332
Joined: Thu Oct 18, 2007 1:55 pm
Location: Shiloh, IL

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by knight-of-ni » Sat Sep 26, 2015 1:57 pm

I'm tracking an issue with the latest development snapshot using an mjpeg Airlink camera. It stopped working and has me completely stymied at the moment. I'm getting can't bind errors, but I've established the message is a red herring.

I need to roll back commits to find the cause, but that is going to be time consuming. It's possible this is related.

Please post your entire camera configuration and all error messages you see from the log, verbatim. More is better.

Do you have any older version zoneminder available which you can roll back to and then report if the camera starts working again?
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Sat Sep 26, 2015 2:59 pm

Hi, I have not experience with log, so please let me know how activate and grab.
I have zm 1.28.100 and TiniMonitor work fine.

Marco
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Sat Sep 26, 2015 9:50 pm

Marco,
When you log into ZM with your browser, look at the top right corner - you will see "Log". Click on it and it will show you logs.

Does ZoneMinder still show the monitor but only tinyCam does not work? If so, I don't think it is related to any problem with ZM.
If ZoneMinder is also not showing the monitor, then it may be a problem in ZM.
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Sat Sep 26, 2015 11:10 pm

Hi asker,
Zm is showing cam, and also zmNimja. Issue is only with tinyCam Monitor. On monday I'll write on tiniCam forum.
Thanks
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Sat Sep 26, 2015 11:26 pm

marcolino7 wrote:Hi asker,
Zm is showing cam, and also zmNimja. Issue is only with tinyCam Monitor. On monday I'll write on tiniCam forum.
Thanks
zmNinja is an awesome app. I think pliablepixels is a genius. :lol: :lol: :lol: :lol:
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

marcolino7
Posts: 72
Joined: Wed Sep 16, 2015 12:20 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by marcolino7 » Sat Sep 26, 2015 11:53 pm

I give it a quick try, and its a georgeus app.
I nedd to make https working and I'll leave tinyCam. :D
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration

User avatar
asker
Posts: 1419
Joined: Sun Mar 01, 2015 12:12 pm

Re: tinyCam Monitor stop to work after update to 1.28.106

Post by asker » Sun Sep 27, 2015 12:08 am

marcolino7 wrote:I give it a quick try, and its a georgeus app.
I nedd to make https working and I'll leave tinyCam. :D
Making HTTPS work is very simple. Just email the ".crt" file to your android device and install it. That's all
https://github.com/pliablepixels/zmNinj ... uration.md
Please don't ask me questions via PM. Feel free to post in the forums or Github

My collection of ZoneMinder learnings:
https://wiki.zoneminder.com/Various_ZM_thoughts

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests