tinyCam Monitor stop to work after update to 1.28.106
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
tinyCam Monitor stop to work after update to 1.28.106
Hi,
I just updated to 1.28.106, and tinyCam Monitor stop to work.
Error shown when tring to connect is "Socket is closed."
Thanks for any help.
Regards
I just updated to 1.28.106, and tinyCam Monitor stop to work.
Error shown when tring to connect is "Socket is closed."
Thanks for any help.
Regards
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
You should probably take this up with the tinyCam folks.
Note that 106 is not a stable release, so tinyCam may want to wait till it gets into a production (stable) release, but that is a conversation you should probably have with them
Note that 106 is not a stable release, so tinyCam may want to wait till it gets into a production (stable) release, but that is a conversation you should probably have with them
marcolino7 wrote:Hi,
I just updated to 1.28.106, and tinyCam Monitor stop to work.
Error shown when tring to connect is "Socket is closed."
Thanks for any help.
Regards
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
Hi asker,
thanks for hel. I'll contact tinyCam.
Meanwhile I'll wait for zmNinja
thanks for hel. I'll contact tinyCam.
Meanwhile I'll wait for zmNinja
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
Oh - did you send me an email with the details?marcolino7 wrote:Hi asker,
thanks for hel. I'll contact tinyCam.
Meanwhile I'll wait for zmNinja
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
Yes sure,
I'm waiting for a reply. I would like to partecipate at beta testing if it possible.
Regards
I'm waiting for a reply. I would like to partecipate at beta testing if it possible.
Regards
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
I'm sorry, but I can't find any email from you. Please resend to pliablepixels at gmailmarcolino7 wrote:Yes sure,
I'm waiting for a reply. I would like to partecipate at beta testing if it possible.
Regards
Please make sure you provide all the details as per http://www.zoneminder.com/forums/viewto ... 32&t=23073
Last edited by asker on Fri Sep 25, 2015 5:40 pm, edited 1 time in total.
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
Lust sent the email
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
Got it - I've sent you the invitemarcolino7 wrote:Lust sent the email
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
- knight-of-ni
- Posts: 2404
- Joined: Thu Oct 18, 2007 1:55 pm
- Location: Shiloh, IL
Re: tinyCam Monitor stop to work after update to 1.28.106
I'm tracking an issue with the latest development snapshot using an mjpeg Airlink camera. It stopped working and has me completely stymied at the moment. I'm getting can't bind errors, but I've established the message is a red herring.
I need to roll back commits to find the cause, but that is going to be time consuming. It's possible this is related.
Please post your entire camera configuration and all error messages you see from the log, verbatim. More is better.
Do you have any older version zoneminder available which you can roll back to and then report if the camera starts working again?
I need to roll back commits to find the cause, but that is going to be time consuming. It's possible this is related.
Please post your entire camera configuration and all error messages you see from the log, verbatim. More is better.
Do you have any older version zoneminder available which you can roll back to and then report if the camera starts working again?
Visit my blog for ZoneMinder related projects using the Raspberry Pi, Orange Pi, Odroid, and the ESP8266
All of these can be found at https://zoneminder.blogspot.com/
All of these can be found at https://zoneminder.blogspot.com/
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
Hi, I have not experience with log, so please let me know how activate and grab.
I have zm 1.28.100 and TiniMonitor work fine.
Marco
I have zm 1.28.100 and TiniMonitor work fine.
Marco
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
Marco,
When you log into ZM with your browser, look at the top right corner - you will see "Log". Click on it and it will show you logs.
Does ZoneMinder still show the monitor but only tinyCam does not work? If so, I don't think it is related to any problem with ZM.
If ZoneMinder is also not showing the monitor, then it may be a problem in ZM.
When you log into ZM with your browser, look at the top right corner - you will see "Log". Click on it and it will show you logs.
Does ZoneMinder still show the monitor but only tinyCam does not work? If so, I don't think it is related to any problem with ZM.
If ZoneMinder is also not showing the monitor, then it may be a problem in ZM.
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
Hi asker,
Zm is showing cam, and also zmNimja. Issue is only with tinyCam Monitor. On monday I'll write on tiniCam forum.
Thanks
Zm is showing cam, and also zmNimja. Issue is only with tinyCam Monitor. On monday I'll write on tiniCam forum.
Thanks
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
zmNinja is an awesome app. I think pliablepixels is a genius.marcolino7 wrote:Hi asker,
Zm is showing cam, and also zmNimja. Issue is only with tinyCam Monitor. On monday I'll write on tiniCam forum.
Thanks
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
-
- Posts: 73
- Joined: Wed Sep 16, 2015 12:20 pm
Re: tinyCam Monitor stop to work after update to 1.28.106
I give it a quick try, and its a georgeus app.
I nedd to make https working and I'll leave tinyCam.
I nedd to make https working and I'll leave tinyCam.
Production Zoneminder 1.31.4 Ubuntu 16.04 LTS on VmWare ESXi
6 Cameras FOSCAM FI8918W
OpenHab Integration
6 Cameras FOSCAM FI8918W
OpenHab Integration
Re: tinyCam Monitor stop to work after update to 1.28.106
Making HTTPS work is very simple. Just email the ".crt" file to your android device and install it. That's allmarcolino7 wrote:I give it a quick try, and its a georgeus app.
I nedd to make https working and I'll leave tinyCam.
https://github.com/pliablepixels/zmNinj ... uration.md
I no longer work on zmNinja, zmeventnotification, pyzm or mlapi. I may respond on occasion based on my available time/interest.
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs
Please read before posting:
How to set up logging properly
How to troubleshoot and report - ES
How to troubleshoot and report - zmNinja
ES docs
zmNinja docs