No Control Tab for FI9821W on Monitor Setup

Forum for questions and support relating to the 1.26.x releases only.
Post Reply
chaoticmachinery
Posts: 8
Joined: Sat Apr 20, 2013 9:59 pm

No Control Tab for FI9821W on Monitor Setup

Post by chaoticmachinery » Thu Oct 31, 2013 11:35 pm

Hello,

I don't have a Control tab for my FI9821W as shown in http://www.zoneminder.com/forums/viewto ... it=FI9821W.

I did go through the setup and seen that in the 1.26.4 version I recent downloaded all of the steps were already implemented. The perl module was there, the change to controlcap.php, and change to the Controls table. I followed the screen shots shown in web page. Still no Control tab?

BTW this is a brand new install of ZoneMinder.

Any suggestions?

Thanks,
CM

chippy99
Posts: 66
Joined: Wed Aug 30, 2006 5:38 pm
Location: Barnet, Herts. UK

Re: No Control Tab for FI9821W on Monitor Setup

Post by chippy99 » Fri Nov 01, 2013 1:15 am

If you go into options from the main screen and then select the system tab, near the bottom is OPT_CONTROL, enable this and you should then see the control tab that is missing.

chaoticmachinery
Posts: 8
Joined: Sat Apr 20, 2013 9:59 pm

Re: No Control Tab for FI9821W on Monitor Setup

Post by chaoticmachinery » Fri Nov 01, 2013 12:28 pm

Thank you.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests