How to record all frames during alarm

Forum for questions and support relating to the 1.26.x releases only.
Post Reply
tkalfaoglu
Posts: 65
Joined: Wed Nov 22, 2006 6:19 am

How to record all frames during alarm

Post by tkalfaoglu » Sun Sep 22, 2013 5:07 am

Hi there. I noticed that, unless something big happens, not all alarm frames are recorded.
For example, if I walk in front of the camera at some distance, stand still or do something that doesn't require much movement, then those frames are not present in the resulting event. It just shows me going somewhere and coming back. I wondered if I could get those relatively-idle frames be recorded as well? This could give a better feedback on how long some activity took.

PS: We need a "general zoneminder" forum; as I'm sure this is not specific to 1.26.x..

Regards, -turgut

jameswilson
Posts: 5109
Joined: Wed Jun 08, 2005 8:07 pm
Location: Midlands UK
Contact:

Re: How to record all frames during alarm

Post by jameswilson » Sun Sep 22, 2013 2:00 pm

Increase the number of post alarm images
James Wilson

Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk

bb99
Posts: 943
Joined: Wed Apr 02, 2008 12:04 am

Re: How to record all frames during alarm

Post by bb99 » Sun Sep 22, 2013 2:50 pm

Or if the frames that are missing are at the beginning then increase the pre alarm frames setting.

tkalfaoglu
Posts: 65
Joined: Wed Nov 22, 2006 6:19 am

Re: How to record all frames during alarm

Post by tkalfaoglu » Mon Sep 23, 2013 5:58 am

Many thanks! I'm upping the after-frames then.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests