Monitoring Cams on Other ZM Machines

Forum for questions and support relating to the 1.25.x releases only.
Post Reply
SuperSpy
Posts: 5
Joined: Wed Sep 15, 2010 5:24 pm

Monitoring Cams on Other ZM Machines

Post by SuperSpy » Wed Aug 31, 2011 6:39 pm

Here at work, I've got two buildings with separate zm machines running their respective cams in each building. I would like to set them up so that each machine has a lower frame rate monitor to the other building's cameras, in the event that one machine doesn't survive an incident. The machines are running a combination or IP and UVC cameras, so just addressing the cameras directly is out of the question.

I could have sworn I had read somewhere there was a way to access another zm machine's cameras as a source, but now I can't find any reference to it. Is it possible? Currently one machine is running 1.25.0 and the other is 1.24.2, but I plan on updating the 1.24 machine soon.

User avatar
kingofkya
Posts: 1111
Joined: Mon Mar 26, 2007 6:07 am
Location: Las Vegas, Nevada

Re: Monitoring Cams on Other ZM Machines

Post by kingofkya » Wed Aug 31, 2011 9:08 pm

Code: Select all

http://10.0.0.115/cgi-bin/nph-zms?mode=jpeg&monitor=1&scale=100&maxfps=30&password=admin&username=admin

SuperSpy
Posts: 5
Joined: Wed Sep 15, 2010 5:24 pm

Re: Monitoring Cams on Other ZM Machines

Post by SuperSpy » Mon Sep 12, 2011 7:22 pm

kingofkya wrote:

Code: Select all

http://10.0.0.115/cgi-bin/nph-zms?mode=jpeg&monitor=1&scale=100&maxfps=30&password=admin&username=admin
Thanks for that, and sorry about the late reply, but any way to get that to work over an SSL connection?

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests