Track Motion with Foscam FI8918W

Forum for questions and support relating to the 1.24.x releases only.
Post Reply
gmar_87
Posts: 69
Joined: Sat Aug 13, 2011 11:38 pm
Location: Melbourne, Australia

Track Motion with Foscam FI8918W

Post by gmar_87 » Sun Aug 28, 2011 7:26 am

I'm using Foscam FI8918W cameras and have a control script working with Pan,Tilt & Presets.

The control script has Can move mapped=ticked. The control tab of the cameras has Track motion=ticket, Track delay=0, Return location=Preset 1, Return delay=3. The camera returns to Preset 1 after 3 seconds, but doesn't move to track motion...

Does the control script need to have tracking features or does Zoneminder use the control scripts standard pan tilt actions to track the motion?

Can't find much in the Wiki about the "track motion" feature...

theforce
Posts: 129
Joined: Tue May 11, 2010 5:22 am

Re: Track Motion with Foscam FI8918W

Post by theforce » Wed Sep 14, 2011 12:16 am

Bumping this up as I'm interested in this.

gmar_87
Posts: 69
Joined: Sat Aug 13, 2011 11:38 pm
Location: Melbourne, Australia

Re: Track Motion with Foscam FI8918W

Post by gmar_87 » Wed Sep 14, 2011 9:16 am

I found this http://www.zoneminder.com/forums/viewto ... ack+motion
Going to see if i can get it working with a Foscam FI8918W...

kirk
Posts: 4
Joined: Thu Dec 01, 2011 5:22 pm

Re: Track Motion with Foscam FI8918W

Post by kirk » Thu Dec 01, 2011 5:26 pm

Any luck on this? I'm in the exact same position.

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests