zoneminder wrote:To anyone interested.
I have uploaded version 1.24.3 to the server and it is available for download at http://www2.zoneminder.com/downloads/Zo ... 4.3.tar.gz
Parse error: syntax error, unexpected $end in /var/www/zoneminder/htdocs/includes/functions.php on line 2319
I think this is all ok but if you have a scenario which causes an error I would be interested to find out what it is. The codec context is gotten from the format context streams (which is why no codec context needs to be allocated, it is also freed by av_close_input_file). That fills in the codec context info with details from the stream. The mBuffer variable is what mFrame uses for it's storage so it is used. According to valgrind anyway there is no access to uninitialised fields.mastertheknife wrote:Hi Phil,
On another note, i think i've located another problem in the same file, although its harmless because mBuffer doesn't seem to be used for anything.
mCodecContext->height and mCodecContext->width in PrimeCapture() on a new codec context initialized by avcodec_open() and at this point doesn't contain properties such as height and width. This can cause avpicture_get_size to spit an error or a random value and mBuffer will reserve a memory buffer of the wrong size and later might cause memory corruption\segmentation fault. Correct height and width will be set automatically later by avcodec_decode_video2() causing the scaling process to work as expected.
mastertheknife
Code: Select all
configure: error: zm requires Video4Linux to be installedGive me a _GO_ and I'll /msg you all necessary info to access that machine in case you want to test/develop in it.Kernel version (from /proc/version):
Linux version 2.6.38-3-generic-pae (buildd@roseapple)
(gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-2ubuntu2) )
#30-Ubuntu SMP Thu Feb 10 00:54:59 UTC 2011
uname -a
Linux srvr.lan 2.6.38-3-generic-pae #30-Ubuntu SMP Thu Feb 10 00:54:59 UTC 2011 i686 i686 i386 GNU/Linux
No sure what a _GO_ is but can you check if you have /usr/include/linux videodev2.h or the same header but perhaps somewhere else? It might also be useful to see the section of config.log where it is checking it.LuizCB wrote:hi Phil
On Natty (next Ubuntu release), ZM (Checked out revision 3297) ends configuration with:despite being updated.Code: Select all
configure: error: zm requires Video4Linux to be installed
All these i386 v4l Natty packages are installed
----
Give me a _GO_ and I'll /msg you all necessary info to access that machine in case you want to test/develop in it.Kernel version (from /proc/version):
Linux version 2.6.38-3-generic-pae (buildd@roseapple)
(gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-2ubuntu2) )
#30-Ubuntu SMP Thu Feb 10 00:54:59 UTC 2011
uname -a
Linux srvr.lan 2.6.38-3-generic-pae #30-Ubuntu SMP Thu Feb 10 00:54:59 UTC 2011 i686 i686 i386 GNU/Linux
Regards
Luiz
PacoLM wrote: Hi,
I have tried to install manually the perl module but:
Code: Select all
cpan[1]> install Sys:Mmap CPAN: Storable loaded ok (v2.20) PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/mmap.t ........... ok t/munmap_errors.t .. 1/14 # Failed test 'Unmapped strings die' # at t/munmap_errors.t line 31. # got: 'munmap failed! errno 22 Argumento inválido # ' # expected: 'munmap failed! errno 22 Invalid argument # ' [/quote] Hi Normal install of CPAN Sys::Mmap doesn't work with tthe error message above. To execute a correct install, you have to launch cpan as : LC_ALL=C perl -MCPAN -e shell It worked for me Pierre
Code: Select all
/usr/include/libavutil/common.h:154: error: ‘UINT64_C’ was not declared in this scopeIt looks like Ubuntu Natty has removed the videodev.h header, and presumably therefore support for Video4Linux1. I will have to have a poke around and restructure things a bit to not mind.LuizCB wrote:"give me a go" = tell me to 'go ahead' with the desire of using my machine to check the error and develop whatever you need regarding this issue, under Natty, so i would send you the access credentials.
the log is at:
http://paste.ubuntu.com/566818/
Luiz
Well that's interesting then. Without changing anything else in the environment, and starting from a "make distclean" state in both trees, 1.24.3 builds cleanly without requiring setting CXXFLAGS="-D__STDC_CONSTANT_MACROS" on the configure step. I thought the likely spot for changes would have been src/zm_ffmpeg.h, but I see that there were no changes between versions. Curious.zoneminder wrote:Hmm, not sure why as I don't think I've changed anything in that area. Possibly ffmpeg has tidied things up a bit?
Code: Select all
configure: error: zm requires Sys::Mmap for mapped memoryCode: Select all
sudo cpan Sys::MmapCode: Select all
./configure --with-webdir=/var/www/zm --with-cgidir=/usr/lib/cgi-bin ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=zmuser ZM_DB_PASS=zmpass --enable-debug=yes --with-webgroup=www-data --with-webuser=www-data --enable-mmap=yes CPPFLAGS="-D__STDC_CONSTANT_MACROS"
)Code: Select all
Feb 16 23:44:49 srvr zmdc[2218]: FAT [Can't connect: No such file or directory]
Feb 16 23:44:49 srvr zmpkg[2209]: ERR [Unable to run "sudo -u www-data /usr/local/bin/zmdc.pl startup", output is "Starting server"]
Feb 16 23:44:51 srvr zmpkg[2272]: INF [Command: start]
Feb 16 23:44:52 srvr zmdc[2282]: INF [Server starting at 11/02/16 23:44:52]
Feb 16 23:44:54 srvr zmdc[2282]: FAT [Can't bind: No such file or directory]
Feb 16 23:45:02 srvr zmdc[2281]: FAT [Can't connect: No such file or directory]
Feb 16 23:45:02 srvr zmpkg[2272]: ERR [Unable to run "sudo -u www-data /usr/local/bin/zmdc.pl startup", output is "Starting server"]Code: Select all
sudo /etc/init.d/zm start
Starting ZoneMinder: Can't connect: No such file or directory at /usr/local/share/perl/5.10.1/ZoneMinder/Debug.pm line 349
ZoneMinder::Debug::Fatal('Can\'t connect: No such file or directory') called at /usr/local/bin/zmdc.pl line 168
failureCode: Select all
Feb 17 00:07:58 srvr zmpkg[5773]: INF [Command: start]
Feb 17 00:07:58 srvr zmdc[5783]: INF [Server starting at 11/02/17 00:07:58]
Feb 17 00:08:00 srvr zmdc[5783]: FAT [Can't bind: No such file or directory]
Feb 17 00:08:08 srvr zmdc[5782]: FAT [Can't connect: No such file or directory]
Feb 17 00:08:08 srvr zmpkg[5773]: ERR [Unable to run "sudo -u www-data /usr/local/bin/zmdc.pl startup", output is "Starting server"]
I'm having the same problem with the 1.24.3 download - haven't tried SVN.aajpotter wrote: The latest SVN and 1.24.3 produce the following error in the browser:
Parse error: syntax error, unexpected $end in /var/www/zoneminder/htdocs/includes/functions.php on line 2319
Can you post the output of when you run 'make install'?LuizCB wrote:Phil,
(ZM_revision_3302)
so far, related to the previous issue (v4l), it seems like you solved it.
LuizCB