I-View CP-1400AS

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
gugabsd
Posts: 2
Joined: Sat Jun 16, 2007 11:09 pm
Contact:
Contact gugabsd

I-View CP-1400AS

Post by gugabsd »

Hi all

I have one card dvr model:

CP-1400AS (look: http://www.monitormaster.com/dvrboard.htm)

but, only channel is visible (channel #3)

my dmesg:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 18 (level, low) -> IRQ 177
bttv0: Bt878 (rev 17) at 0000:04:04.0, irq: 177, latency: 32, mmio: 0x90001000
bttv0: subsystem: 8281:55aa (UNKNOWN)
please mail id, board name and the correct card= insmod option to video4linux-list@redhat.com
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffc0a [init]
bttv0: using tuner=4
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0


Somebody successfully uses this card in zoneminder?

what is the best config for modprobe.conf ?

Thanks all
Top
User avatar
cordel
Posts: 5210
Joined: Fri Mar 05, 2004 4:47 pm
Location: /USA/Washington/Seattle

Post by cordel »

This is the first I have seen of this board. You might give a shot at card=10 or card =77. Else if you want to PM me with what this board costs, I might consider picking one up and having a round with it.
Top
JCDenton513
Posts: 1
Joined: Sun Jul 15, 2007 7:36 pm

Post by JCDenton513 »

We also have this card for a system at a store I'm work for and I was looking to run linux on it instead of Windows for stability (and the computer's currently running Win98 :/). I'll be working on it within a couple of days so I might be able to add some input. The reason I posted though is because I found some information on the card that might be useful. Not a tutorial to get it to work but information for someone who knows what they're doing.

Source: http://cassy.dfmk.hu/~cassy/drivers/TV/ ... allery.de/

Code: Select all

Iview I-View   www.ezwatchstore.com
"EZ Watch Pro" digital surveillence system   
 
chips. bt878 (with head sink), xtal 28.6z8, xtal4, U3 24c02, U11 74hc00d, U10 mdt10c61p, u13 74hc4051, u14 lm71 71, u15 lm1881
connectors; 4x BNC, audio in (yellow)
connector backside: J9 (PC Reset), red LED
pcb: i-view CP-1400AS v1.4

0000:00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 
       Subsystem: Unknown device 8281:55aa 
0000:00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 
       Subsystem: Unknown device 8281:55aa 

bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 10, latency: 64, mmio: 0xdfcfe000 
bttv0: subsystem: 8281:55aa (UNKNOWN) 
bttv0: gpio: en=00000000, out=00000000 in=00ffff0a [init]

from INF:
[Microsoft]
%BT878.VDeviceDesc% =BT878.Device, PCI\VEN_109E&DEV_036E&SUBSYS_55AA8281
%BT878.VDeviceDesc2%=BT878.Device2,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8292
%BT878.VDeviceDesc3%=BT878.Device3,PCI\VEN_109E&DEV_036E&SUBSYS_55AA82A3
%BT878.VDeviceDesc4%=BT878.Device4,PCI\VEN_109E&DEV_036E&SUBSYS_55AA82B4

%BT878.VDeviceDesc% =BT878.Device, PCI\VEN_109E&DEV_036E&SUBSYS_55AA821C
%BT878.VDeviceDesc2%=BT878.Device2,PCI\VEN_109E&DEV_036E&SUBSYS_55AA821D
%BT878.VDeviceDesc3%=BT878.Device3,PCI\VEN_109E&DEV_036E&SUBSYS_55AA821E
%BT878.VDeviceDesc4%=BT878.Device4,PCI\VEN_109E&DEV_036E&SUBSYS_55AA821F

%BT878.VDeviceDesc% =BT878.Device, PCI\VEN_109E&DEV_036E&SUBSYS_55AA8210
%BT878.VDeviceDesc2%=BT878.Device2,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8211
%BT878.VDeviceDesc3%=BT878.Device3,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8212
%BT878.VDeviceDesc4%=BT878.Device4,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8213
%BT878.VDeviceDesc5%=BT878.Device5,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8214
%BT878.VDeviceDesc6%=BT878.Device6,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8215
%BT878.VDeviceDesc7%=BT878.Device7,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8216
%BT878.VDeviceDesc8%=BT878.Device8,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8217

%BT878.VDeviceDesc% =BT878.Device, PCI\VEN_109E&DEV_036E&SUBSYS_55AA8250
%BT878.VDeviceDesc2%=BT878.Device2,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8251
%BT878.VDeviceDesc3%=BT878.Device3,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8252
%BT878.VDeviceDesc4%=BT878.Device4,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8253
%BT878.VDeviceDesc5%=BT878.Device5,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8254
%BT878.VDeviceDesc6%=BT878.Device6,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8255
%BT878.VDeviceDesc7%=BT878.Device7,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8256
%BT878.VDeviceDesc8%=BT878.Device8,PCI\VEN_109E&DEV_036E&SUBSYS_55AA8257
...
Msft=               "I-View Communication Inc."
MsftMfg=            "I-View Communication Inc."
BT878.VDeviceDesc=  "WitnessXP PCI0 Device Video Server Capture"
BT878.VDeviceDesc2= "WitnessXP PCI1 Device Video Server Capture"
BT878.VDeviceDesc3= "WitnessXP PCI2 Device Video Server Capture"
BT878.VDeviceDesc4= "WitnessXP PCI3 Device Video Server Capture"
BT878.VDeviceDesc5= "WitnessXP PCI4 Device Video Server Capture"
BT878.VDeviceDesc6= "WitnessXP PCI5 Device Video Server Capture"
BT878.VDeviceDesc7= "WitnessXP PCI6 Device Video Server Capture"
BT878.VDeviceDesc8= "WitnessXP PCI7 Device Video Server Capture"
Top
Post Reply

Return to “Hardware Queries”